ninjaflex problem settings

Materials

Oct 28, '15

Very common problem. I suggest printing at 120% flow rate and see where that gets you, also try printing at 30-40mm/s; turn retraction distance to 1mm.

Problems with jerk

3D Printers

Oct 22, '15

Jerk, as far as I understand is kind of like the g64 p- tolerance settings in linuxcnc and has more to do with trajectory planning than anything else. It looks like your getting detail in motion but the extrusion is inconsistent. Then Maybe your extruders jerk should be increased…? Just a guess

3D printing an E-nable hand for Charity, My experience.

3D Printers

Oct 21, '15

Our hub recently printed 16 of the raptor reloaded in 100%, 120%, 124%, 130% and 140%. For the tensioning screws and pins we used m3x20(100% only), m4x20, or m5x20 (140% only) screws being sure to predrill and tap them, appropriately. For the Palm Velcro we used m5x8mm or m3x8mm (100% only) button s…