-
Brilliant!.. thank you for the link!
-
that’s great, thank you!
-
Looks good for human body/heads - http://www.3dscanstore.com/index.php?route=common/home
-
Hi all, Is there a website for high poly scans for either animal or human heads? The alternative is just to find models like on turbosquid but I would preferably like to find scans. I would like to print them in order to try painting them. Thanks, Martin
-
Thanks Lucika, that’s very nice, much more what I’m looking for!
-
Hi Alexandre, I’m in Bath, UK - in the south-west. Sounds like an interesting idea, I could send you some of my work if you want to see what I’ve done in the past. If you’ve any scans you want me to look at I’d be interested to see them.
-
I noticed on the interview she was using Golden acrylics, I’ve got some at home, very good and expensive acrylics
-
Thanks for the tips!.. cool owl too
-
That’s great, thank you for the link. It gives me something to go on, I’d still like to find some more detailed paintwork - the sort of work done on models for movies like Jurassic park
-
Hey all, I am from a traditional oil painting background and now a 3D artist for a landscape architects. I’m getting into 3D printing a little and thought I might be able to combine my skills. For example, I could model a rhinos head in detail, print it out and paint it in detail. A example of a pa…
-
On another forum I had the response below, I just wanted to know the general consensus on FDM printers for architecture, do we need a resin printer for our architectural needs or will an FDM printer suffice 'Yes, as I thought I don’t think FDM would really be that helpful for you. For example, you …
-
The BigBox looks very good value, for relative novices in this area would it not be a risk for us to buy a printer that hasn’t had reviews? - it’s hard to know whether we’d end up with a terrible printer like I’ve heard the Makerbot Z18 is. The other thing again is the build volume, it says 300 x 20…
-
*comment moved
-
The outer dimensions of the first picture are 300mm x 300mm, it’s all 3D printed apart from those yellow-ish bushes, for smaller features like cars/people/trees we would just buy them, much cheaper, so we probably wouldn’t need Form 1+ - not saying it wouldn’t be nice to have. For the second pictur…
-
Just having a look at the Creatr HS, the only thing is it’s build area is smaller than I hoped for 28x27x18 cm - before we get a printer in it’s hard to tell if that would suffice but I’ve been asked by the boss to try as best I can to narrow my search to minimumns of about 30cm x 30cm x 30cm
-
Good day all, I thought I would start a clean thread with a slightly more educated shortlist on a printer for our needs, it needs to have a large build volume, preferably at least 30cm x 30cm x30cm, budget is under £10k ($15k). I would like to whittle this list down to 2-3 with your help. Wanhao D…
-
ok, i will do
-
Thanks for the offer but I’m a little far away in the UK
-
Hi, thank you for the info, it looks impressive. Can you tell me what price the GF printer is? - and which architects have purchased it? - i’d really like to see some reviews of it to if you have any, or any architectural work that’s gone through it.
-
Wow, that build area is huge!.. so many printers, it’s really quite difficult trying to whittle it down - build area vs cost vs quality of print
-
any thoughts on the CSP DELTAWASP 40×60? - it sounds too good to be true here http://3d-printers.ireviews.com/csp-deltawasp-40x60-review
-
Oh I’m sorry I missed that, I think the ctc would be too small for our needs, I think build volume is pretty important which makes the Creatr XL very interesting, as well as the Makerfarm Prusa i3v for it’s cost and the build volume is decent
-
Sorry, which printer is that?, I haven’t seen that printer mentioned yet in this discussion
-
thank you for the offer, on which of those printers could you do a sample?.. and where are you based?
-
Can anybody else tell me anything more about any of these printers? - I’ve looked into them but always better to hear a users experience
-
I would really like to propose 2/3 printers to my boss, the first would be the 12" Makerfarm Prusa i3v, though my boss may prefer to have a printer that’s ready to go so I need alternatives, possibly one in the 3k range and then if there are any worth going for up to 10k. Is it worth going to 10k?, …
-
Thanks all for your help, Nikkie, the Big Builder Dual Feed and the Type A Machine Series look interesting on your guide, I think it’s very important that we have a large build area. Thanks for the advice KuL3d, I’ve also seen a few things about the Z18 which is making me question whether it would b…
-
Hey all, I’m working at a landscape architects and we’re looking to buy a 3D printer, we’ll be looking to print schemes and possibly various single elements such as bespoke benches/features etc I’m a 3D visualiser here but really not sure what to look for in a printer, there is such a wide range a…
