Skip to main content
Skip to profile content
-
Hi Don, I’ve just gone through this learning process myself, and can offer some of my experiences. Firstly, it’s very useful to have two printers, so one “expensive” main printer, and one cheapo one to experiment and learn with (and to print parts for the other one if it’s down). I would suggest you…
-
Hi, Could your slicer settings have changed during your downtime (new slicer install, or upgrade, or something)? The two main causes of strings are too high a hotend temperature and too low (or no) retraction settings. Both of these are down to slicer settings, so I would start by checking your retr…
