-
Yeah I’m afraid that 260 will end up breaking it even more… There have been two suggestions on changing to all metal so I will try that! Thank you!
-
I’ll try using all metal! Thank you for the tips!
-
It did come out at the start of the printing process. When it reached around 50% done, then it was jammed…
-
Hi yes sorry forgot to mention I need help on how to print it without jamming since their advised parameters still result in jamming. Cheers!
-
Hi everyone, is there anyone experienced with printing using nGen_FLEX without having the filament jammed in the nozzle? I’m printing using Flash Forge Creator Pro with extrusion temp of 250oC (the advised temperature from ColorFabb is 240-260). The printing speed was reduced to 10 m/s (because it w…
-
Sounds great! Looking at some potential copper filaments. Cheers!
-
Hi! Thanks for the suggestion. The PRO1 looks great plus it can reduce printing time. I will definitely consider this
-
Hi everyone! I’m printing a biomedical chip that needs to be autoclavable. Autoclave conditions are: 121 deg. celcius, 100 kPa, 15 minutes. I have tried printing using polycarbonate filament but it didn’t survive the first autoclave trial. PC filament was supposedly autoclavable because its Tg is 14…
