-
Hi, The Printrbot Metal Plus is also available pre-assembled, but based on my experience of building a Printrbot Simple Metal (which only took about 3 hours to build with me taking pictures to document the process) it should an easy build. I can really recommend Printrbot Simple Metal based on the …
-
I use white lithium grease but just a small amount because i think technically the bearings are supposed to be self-lubricating.
-
The bearings should be self lubricating. If you feel they need to be lubricated, then a little light oil or lithium grease, but just a touch - too much will cause other issues.
-
Here’s some things I do to keep prints from popping off early: I print the first layer hotter than the rest of the print. I start my PLA prints at 215, but run the rest of the print at 185. Slic3r will let you do this, Cura won’t (not yet, anyway) - check your software to see if it’s an option. Thi…
