-
This whole ranking experiment is getting ridiculous. If I have accepted every order how then is my order accept rating only 96%? someone needs to stop with the common core math. Also, why is archiving an enquiry a declined order? Just another thing that makes no sense except that 3dhubs wants to ru…
-
1st pic : under extrusion. Increase the extrusion width or calibrate the extruder better. Also depends on the material you’re printing with (i.e.if you find the sweet spot with PLA, that may not be the same for PETG, etc.) 2nd pic : bubbles are formed as the hotend is going up one layer on the Z ax…
-
IMHO the default speed in Cura for the Prusa i3Mk2 is a bit “optimistic” I tend to print a bit slower. I don’t like the vibrations the machine makes at high speed… Happy printing!
-
You need to continue to work on your retraction settings, including how much is retracted, how fast you can retract, etc. You can also try printing the model from outside in or inside out. You have to get to the point that when your printer is finished with a layer, there is enough reverse pressure…
