9

Well, I print with 3rd parties materials in all time I have this printer :slight_smile:

10

These news are great !!

Zortrax is best 3d printer!

1 Like
11

You are aware that only concerns US, right? And printer bought through store.zortrax.com from outside europe aren’t covered by warranty at all (except DOA cases)

2 Likes
12

It’s accessed in Z-suite software, NOT in the firmware. The original post is incorrect. Just download the latest Z-suite 1.10 and you’re good to go.

Now when you’re in the print menu, select Advanced and a new option appears to choose Zortrax Materials or External Materials. When you choose External Materials you are now able to modify several new printing parameters including temps, speeds, retraction, top/bottom fill, flow rate, etc.

This is huge! Way to go Zortrax, 2 thumbs up!

Now just let us disable raft please :wink:

1 Like
13

Still if you do not get material X to work, you’re on your own and ruining the extruder with bad filament still isn’t covered by warranty :smiley:

It is a good move indeed but we should all still be very careful using it, hence the term “experiment” :wink:

1 Like
14

Great news! But, does anybody knows why PLA is not included in the list? :confused:

15

I strongly disagree with your take on this. An example is a car manufacturer, they cant void your warranty if you use some other brand gasoline and a part such as transmission breaks. But if that other brand gas was not up to standards and clogged your fuel injectors they would be within their rights to deny the warranty claim on the fuel injectors.

Same with zortrax not replacing the hot end under warranty if a 3rd party filament caused it to jam. But if something like the motherboard or heated bed stopped working they can not deny that claim because of 3rd party filament being used.

11 Likes
16

You can disagree with me all you want. You can disagree with the Kevorkian case as well. You can even disagree with the entire constitution. It’s a free country.

The law is still the law and doesn’t consider your agreements or arguments with it. If a company disagrees with laws regarding warranties in the US they can simply stop selling their products in the US.

All of your statements are in agreement with what I have said so I’m not sure where your strong disagreement comes from?

17

The US has a 100 print hour warranty from Zortrax (It’s industry leading here! NOT) the M300 has a 200 hour warranty, per Marta from Zortrax.

Doesn’t change a thing, running 3rd party materials has never voided a warranty legally in the US. This is the same crap Stratasys wants to pull trying to lock people into overpriced materials it gets sickening after a while.

18

It is in the US.

19

It doesn’t matter, you can now adjust the print settings to accommodate any material, including PLA. Just adjust the temps and speeds to what you need. What you start with doesn’t really matter, that’s just to get you in the ballpark.

1 Like
20

Because the zortrax hotend is not well suited for printing PLA due to being all metal. An aftermarket hotend would be more suitable for PLA.

1 Like
21

I don’t bother with the US. This comment was meant for the folks in the EU, many of whom buy their Zortrax through local resellers who are required to give regular consumers a 2 year warranty on every device they sell. So there’s that :slight_smile:

22

Might wanna check this out, on your own risk ofc :wink:

23

Due to the fact that we’ve implemented external material option, the warranty card has been changed in favour of our clients.

We’ve removed the line saying that using 3rd party filaments voids the warranty. At the moment it’s the only change.

If a user misuse the “external materials” option and a part gets damaged (for example an extruder block), a warranty ONLY for this part is voided. The printer’s warranty is still valid.

The same applies for non-EU countries warranty for hidden defects showing in first 100/200 working hours.

I hope it’s all clear now.

If you have any questions, feel free to ask.

Best regards,

Marta

Zortrax Team

3 Likes
24

I guess Z-Temps will go to the wall now?

25

Ha, that’s what I was thinking! But they still have other great mods like the Z-mon that I use to detect when filament runs out and pauses the printer. It’s already paid for itself a few times over saving print jobs from failing for my hubs orders.

There’s also a mod that lets you ditch the perf plate if you want to say print flex materials w/o a raft (which you still couldn’t do even with the new z-suite options).

And I hear good things about z-temp’s alternative hotend.

But yeah, their core product just bacame obsolete.

26

Thanks, I know about it. I’d rather just have it in z-suite, and I figure if Zortrax is already unlocking everything else, why not this as well?

1 Like
27

Zortrax ABS is really affordable and has good quality. I perfectly understand the manufacturer decision to limit options to make their printer more reliable. I will use a 3rd party filament only if it offers something that I don’t get from a Zortrax filament.

28

I have some carbon fiber abs that prints great under the standard Z-ABS settings!