Zortrax M200 / ZSuite won't install - Windows

[printmeup]

You have to install the frameWorks.

you can find it on the zortrax web site

[BackstreetZAFU]

Hi,

Thanks for your reply! I’m on the Zortrax website, and all I see is the software, and the firmware - is the firmware the same thing as the frameworks? If not, do you know where exactly I can find the frameworks?

Thanks!

matt

[calvinrobotics]

Not sure if you’re referring to Windows or Mac?

For MacOS, there’s a link for “other files”, “Mono Framework for Z-Suite on Mac”

http://support.zortrax.com/downloads/software/?os=macosx

For Windows, I think you’ll need an updated .Net framework

[BackstreetZAFU]

Hey, thanks for the suggestion.

So, which combination of software and mono framework would you suggest? I see there are three options for each, and I’m not sure which to use for optimum performance.

Thanks!

matt

[calvinrobotics]

I’m running ZSuite 1.4.1 and 4.0.4.4

[BackstreetZAFU]

That’s what I’ve been running, too.

Do you have problems when you add multiple items to the build plate? I’m trying to print about five items, and every time I try to add multiple models to the build plate, the software stalls and crashes.

[alcristian70]

Hello your system hardware of your PC does not support the ZSuite, try to upgrade or replace the PC you have with a more 'performance, hello.

[calvinrobotics]

Hmmm sorry no, no issues with multiple objects

[BackstreetZAFU]

The software is supposed to be compatible for Windows XP - Windows 10. I’ve tried it on Windows XP and Vista. What would you suggest?

Thank you!

matt

[Print3DGreen]

hello, your problem almost certainly depend from VGA, probably is old hardware and is’nt opengl’s compatible…

excuse me for bad english…i’m italian…hello

[rvtilburg]

What you can try is before you install the software switch off your antivirus software. I had some trouble as well with that.

[Marcin_Zortrax]

Hello,

Its most likely caused by outdated graphic drivers. Since XP is not supported by Microsoft anymore, we can’t guarantee that will work there. As far as I know, Vista is causing some troubles as well, but error shown on your pic indicates VGA problems.

[BackstreetZAFU]

Hey Marcin,

Thanks for the info. What Windows OS would you recommend, then? Anything past Vista?

Thanks!

matt

[Marcin_Zortrax]

Hello,

Exactly, everything above MS Vista.

Regards,

[nicmar]

Hi matt,

did you solve the problem?

I have the same issue with windos 10.

if you have any ideas let me know.

Thank you

Nic

[Marcin_Zortrax]

Have you got *.NET installed on your PC?

[nicmar]

yes,

i have .net framework 4.6.1

i was thinking the same but i have it.

[BackstreetZAFU]

Hey Nic,

I have Windows 8, so I’m not sure. I specifically bought a laptop with Windows 8 to make sure it worked.

This forum has been a big help, though, so I’m sure they can give you some direction.

Good luck!

matt

[nicmar]

ok, I solved the issue! I went back to windows 8.1!

[Chris_110]

Hi,

did anyone get to the bottom of the opengl32.dll issue under windows 10? I am running (or trying to run) the latest version of Z-Suite.

It is certainly not a hardware problem, as Z-Suite was running fine on the same hardware under windows 8 - it was only under the windows 10 install that it has stopped working.

I have ensured I have the latest .net framework installed - and rebooted, and reinstalled z-suite - with no success.

I have tried with AVG and Defender disabled - with no success.

I have tried installing and running under Windows compatibility mode for XP, Vista, Windows 8 - with no success

I have tried replacing the openg32.dll file with an fresh version from another working windows 10 machine - with no success

I have refreshed and updated all my Windows display drivers to latest versions - with no success

Any ideas?

thanks for your suggestions -appreciated.

cheers
ERROR IMAGES.pdf (284 KB)