Ahh that makes sense Jason about the color heads.
Do you have a z510 also?
Once i get all this testing with powder and binders out of the way I’ll see how many I haven’t burned out lol. Still havin issues getting the surfynol sent to our business address.
I have a z310, which takes HP10 black heads.
i don’t use the sufinol mix - I typically run sake rice wine. It’s very inexpensive, and works fine for my monocolor prints.
Quick question,
Where did you get the Surfynol and what type, looks like it comes in different numerical labeling.
Does anyone know of a “general , all around” binder currently being sold that works with most of the older powders? Running a Z400 but I can remember what the powder is.
Thanks,
-Pat
I use Sake as the binder for my ZP-150 in my Z310+
works just fine fine out of the bottle.
I have been trying to get it from sigma aaldrich but they are very frustrating to attempt to order from. They have denied my order because they review your info before sending out. They will not send to a residential address. They did not like my usage explanation when I said it was for 3D printing ink r&d
Whatever is cheapest and in the biggest jug.
and is unflavored!
Having trouble getting the serial port recognized in Zprint software with the z400. Using usb to serial cable (RS-232 DB9). Set to COM1,
anyone else have problem getting it set up first time. Guy I bought the printer from said it was a pain in the ass but doesn’t remember what he had to do to get it working.
PS Got the Sake so we’ll see how that works.
For those hawing hydroperm out of the bag on their 510 what profile, shell and core saturation, and bleed compensations are you using?
Dear All,
We got a Zcorp 510 spectrum in the office and we have a question.
Does anyone know if I can disable three of the four printheads? Software or hardware wise? I only need to print with the binder, so no color required. But for the machine to work it needs the other 3 Cartridges, which costs a lot each time.
Looking forward to you answers or thoughts,
Kind regards,
Maikel
Im not sure on the disabeling but if you have all 4 installed and you get an error on the 123 position you can bypass it by pressing online on the pad. I would look into remanufactured cartridges for your 123 color spots. They run as low as 8-10 a piece. Then spend the 25-35 on a good hp one for the clear. When running a monochrome print it will use about 5 ml in each as part of the starting purge.
Do you have a working profile or saturation settings that are working well for you with hydroperm? How long do you leave the part in etc before pulling
I had to give up on Hydroperm after I studied up on the long term effects of silica dust inhalation.
Ive been printing in sugar ever since
