Z Corp Z510 wiki

designanything3 · 2016-07-30T19:29:35.000Z

I got some materials ready to go. Hydrostone and hydrocal white.

I am going to mix up batches of each. If I’m reading the recipe right 1000-250-250. For 5 pounds of plaster I will mix 1.25 pounds of melodextrin and 1.25 pounds of powder sugar. I also got fondant powder sugar as another option.

CharlesRiverMkr · 2016-07-30T19:40:27.000Z

My first attempt with clay went pretty well.

I think I need to play with the saturation settings. The underside came out pretty distorted. It survived the kiln though.

image_90.jpeg2448×3264 2.21 MB

image_91.jpeg2448×3264 2.11 MB

Jason_McMullan · 2016-07-31T02:47:19.000Z

I don’t know if it’ll work with the Hyrdostone, but with ZP-150 it is possible it ‘set’ the plaster hydraulically, by embedding the printed part in fine dry sand, then saturating it with water for about an hour.

See the bottom of my Z310+ research page for a test-to-destruction video of a hydraulically hardened part:

http://www.evillabs.net/wiki/index.php/ZCorp_Z310%2B#Hydraulic_Curing

designanything3 · 2016-08-02T23:22:13.000Z

Very interesting result on that side. We are getting our kiln set up this month in our shop. We are still having issues with Sigma-Aldrich getting that surfactant for the binder which has been frustrating. On a side note we found a box of 600+ printheads at one of our recycling centers here locally. There are about 175 black and 400+ cmy… After cleaning them they work as new! Wish we could use the cmy heads as well…

Jason_McMullan · 2016-08-03T08:42:01.000Z

I have investigated the CMY heads - even if the firmware could be modified to accept them, their droplet size is less than half of the black heads.

so they aren’t very usable - they would need to double-pass every layer, and would wear out faster than the black heads.

if you find you are in excesss of black heads, send me an email - I’m always in the market for spares.

Troadey · 2016-08-03T16:20:50.000Z

Hi,

Same here. I would be open to buy a big bunch

designanything3 · 2016-08-04T01:25:32.000Z

Ahh that makes sense Jason about the color heads.

Do you have a z510 also?

Once i get all this testing with powder and binders out of the way I’ll see how many I haven’t burned out lol. Still havin issues getting the surfynol sent to our business address.

Jason_McMullan · 2016-08-04T01:56:13.000Z

I have a z310, which takes HP10 black heads.

i don’t use the sufinol mix - I typically run sake rice wine. It’s very inexpensive, and works fine for my monocolor prints.

Solid_Print_3D · 2016-08-16T13:39:41.000Z

Quick question,

Where did you get the Surfynol and what type, looks like it comes in different numerical labeling.

Does anyone know of a “general , all around” binder currently being sold that works with most of the older powders? Running a Z400 but I can remember what the powder is.

Thanks,

-Pat

Jason_McMullan · 2016-08-16T14:05:29.000Z

I use Sake as the binder for my ZP-150 in my Z310+

works just fine fine out of the bottle.

designanything3 · 2016-08-18T15:13:20.000Z

I have been trying to get it from sigma aaldrich but they are very frustrating to attempt to order from. They have denied my order because they review your info before sending out. They will not send to a residential address. They did not like my usage explanation when I said it was for 3D printing ink r&d

Solid_Print_3D · 2016-08-18T15:17:44.000Z

what brand of sake are you using

Jason_McMullan · 2016-08-18T19:19:09.000Z

Whatever is cheapest and in the biggest jug.

and is unflavored!

Solid_Print_3D · 2016-08-20T17:16:14.000Z

Having trouble getting the serial port recognized in Zprint software with the z400. Using usb to serial cable (RS-232 DB9). Set to COM1,

anyone else have problem getting it set up first time. Guy I bought the printer from said it was a pain in the ass but doesn’t remember what he had to do to get it working.

PS Got the Sake so we’ll see how that works.

designanything3 · 2016-10-27T15:44:22.000Z

For those hawing hydroperm out of the bag on their 510 what profile, shell and core saturation, and bleed compensations are you using?

designanything3 · 2016-11-15T17:17:05.000Z

Does anyone know a good source for the binder filters?

also here is a nice print on experimental binder and powder.

img_6440.jpg2448×3264 1.59 MB

Xilloc · 2017-01-09T20:27:37.000Z

Dear All,

We got a Zcorp 510 spectrum in the office and we have a question.

Does anyone know if I can disable three of the four printheads? Software or hardware wise? I only need to print with the binder, so no color required. But for the machine to work it needs the other 3 Cartridges, which costs a lot each time.

Looking forward to you answers or thoughts,

Kind regards,

Maikel

designanything3 · 2017-01-09T20:41:05.000Z

Im not sure on the disabeling but if you have all 4 installed and you get an error on the 123 position you can bypass it by pressing online on the pad. I would look into remanufactured cartridges for your 123 color spots. They run as low as 8-10 a piece. Then spend the 25-35 on a good hp one for the clear. When running a monochrome print it will use about 5 ml in each as part of the starting purge.

designanything3 · 2017-07-13T19:30:28.000Z

Do you have a working profile or saturation settings that are working well for you with hydroperm? How long do you leave the part in etc before pulling

Jason_McMullan · 2017-07-13T21:55:48.000Z

I had to give up on Hydroperm after I studied up on the long term effects of silica dust inhalation.

Ive been printing in sugar ever since