Tumaker Voladora Printer

SiddharthN7 · 2015-09-01T06:08:18.000Z

What is your opinion about the Tumaker Voladora v3 printer when compared with Ultimakers, Makerbots and the like?

Factoria3d · 2015-09-01T09:43:31.000Z

I don´t know, I have Voladora V2x2 printer.

gabriela3d · 2015-09-01T13:21:31.000Z

And what is your experience with it so far? Would you recommend it?

boydconnor · 2015-09-01T19:47:50.000Z

Agree. I must admit I’ve never hear of this one. I’d be curious to know what’s your experience with it. Cheers

Factoria3d · 2015-09-02T08:39:35.000Z

(Sorry, my english is not very good)

Voladora V2 and V3 are from “Tumaker” a spanish company, from the basque country. The V3 is an evolution of the V2.

Well, I think that is quite similar to Ultimaker, etc. I have had some problems, probably because my inexperience, but the printer is good.

Mine is V2x2 because it has 2 extruders and you can print in 2 colours or you can have 2 different filaments. For example, I have ABS in one extruder and XT in the other extruder, and I don’t have to change the filament so many times.

dsc_0001.jpg6016×4000 5.82 MB

dsc_0002.jpg6016×4000 11.4 MB

gabriela3d · 2015-09-02T13:38:01.000Z

This is great! Thanks for taking the time to clarify this Make sure to share some prints from time to time, I’m really curious now!

Factoria3d · 2015-09-02T14:45:54.000Z

Thanks Gabriela, in my hub I have some prints. We are two friends and we make sci-fy models (painted) and other things.

gabriela3d · 2015-09-02T14:50:07.000Z

Thanks, I’ll check them out then!