yoda3d
March 21, 2016, 6:18pm
152
GIFT3D “don’t get is why you have one in French.”
(google traduction auto:)
good luck too
Before anything else, congrats to the winners, those were some awesome entries, I will definitely print that Super Star Destroyer.
Having said that… serioulsy? Acording to the rules “Final Submission Date : March 21, 2016”, it’s still March 21.
I was finishing my print, (I know it was cutting it close, but the printer decided two days ago to break on me), and was hoping to submit it today, you guys need to write better rules, this was a mess from the start.
3 Likes
Use your tablet or smartphone to create a StarWars lamp with this 3d print.
While charging your tablet in this accessory you have a lucent StarWars lamp.
Load a free app f.ex. “LightTemperatur” or “flashlight” on your device, make it lucent and put it into the stand. Choose the colour you like, suitable to the colour of your room or to your mood.
To charge your device while it works as a mood-light put the charging-cable through the slim opening on both sides of the stand. At the back of the stand you can find an opening to insert your device easily.
If you like to use the lamp without your device, you can use a self-adhesive LED-stripe, just like a real lamp.
You can scale the STL files for the size of your device.
Have fun with the “StarWars-Light”!
(the bb8 standing on the stand comes from thingiverse http://www.thingiverse.com/thing:1377362 )BaseLeft.stl (4.85 MB)BaseRight.stl (4.54 MB)UpperBack01.stl (281 KB)UpperBack02.stl (285 KB)UpperFront01.stl (1.75 MB)UpperFront02.stl (459 KB)
1 Like
It definitely seemed like they were anxious to end this competition ASAP and they sure did.
2 Likes
Oh my God! I’m speechless!
I just got back from the Midwest RepRap Fest with a ton of new filament too.
This is going to be one hard working machine, and make a bunch of kids really happy!
These are some other hands that I have printed customized, and donated if anyone is curious to see what I do in my off time.
http://imgur.com/a/cRYlb
3 Likes
xadow
March 21, 2016, 8:22pm
158
I know, I know it’s too late but I just finished the print (I underestimated the model complexity and the speed of my printer) and as it’s still March 21…
Hammerhead class cruiser: https://www.youmagine.com/designs/hammerhead-class-cruiser-kotor
As seen on the Knights of the Old Republic.
PS Congratulations to the winners, as for the management of this contest, I really hope you learned something, because was really poorly managed competion.
edthomp
March 21, 2016, 10:29pm
159
Congratulations. You are doing awesome work and the smiles on kids faces reflect that. Well deserved.
edthomp
March 21, 2016, 10:32pm
160
Yes. I noticed that before if you look up top right when Simona told us to ask if there was any questions and I knew immediately a time deadline was left out and tried to ask for everyone but it was never answered. Looks like a few others had asked later in the contest too without avail. The contest was quite a disaster in the way it was handled. Hope 3DHubs learn something from this experience. I wish we could have seen your entry. =(
Decadia
March 21, 2016, 11:45pm
161
Hi everyone!
I thought the deadline was today at 23:59. Silly me.
Anyways I have been working on a sculpted Vader pencil holder(+misc holder) for the contest. The prop can also go on the tip of the car hood or on the interior as awesome decor haha. I skipped class for it but it seems I might not be able to enter.
I wanted the model to be easily printable and printer friendly so no Critical layers(tested on the Retina Software) and it is sub 100k polys. It was tough and alot of corrections made but I kept the printer friendly-ness in mind constantly while sculpting while keeping important details and pose. Most printers are able to print this. It is meant to be printed upright for FDM printers. This has been heavily sculpted and I wanted a detailed companion close to Yoda. If the contest ended at the end of the month it would have allowed for me to finish sculpting Obi-Wan and Anakin. There are two versions. One is with the cape and the other without if you want to save material for checking calibration detail. Enjoy for the moment! Vader.stl (5.04 MB)VaderwoCape-ByDecadia.stl (3.47 MB)
5 Likes
edthomp
March 22, 2016, 12:00am
162
Not your fault. They never properly stated a time deadline nor time zone. This is a high quality model. Great job. Did you try printing this yet? Can this be printed properly without support? Left arm may be trouble?
Decadia
March 22, 2016, 12:19am
163
Thanks, I did spend lots of hours on this model to bring the quality up enough for the Yoda companion.
I aim to have others print this happily without supports.
I’m having it printed without supports myself and so far so good. I posed the left arm just at the right angle to have 0 critical layers but if other people have issues I can raise it a bit more. I dont currently have a FDM printer with me so I’ll be testing it out at school. Thanks for the comment!
I can not believe the winner was a 3D printing service who does it for a living & already have there own 3D printer. Talk about unfair is this another case of a rigged contest? I feel total cheated by this
I don’t even own a printer and had to have my good friend run the 48 parts and overnight them to be to make this thing happen. I didn’t know the winner was a company that actively provided services and did this stuff professionally.
Perhaps 3DHubs should have had stipulations on WHO could enter. You can’t get upset at Axis Labs as they didn’t do anything wrong. It’s a position you can take advantage of when those rules don’t apply It all falls on the people responsible for the contest who didn’t think this through well at all.
Hey @GIFT3D , apologies for the late reply. We share the same concerns as you, which is why about 3 weeks ago we announced switching from upvotes to a jury to assess the contest entries. Please see Simona’s message below:
‘Judging Criteria Update: Together with Ultimaker we saw the issues in the upvoting system for the design entries. For this reason we’ve changed the judging criteria system from upvotes to a jury, which will be composed by Ultimaker and 3D Hubs. The winner of the competition will be declared on March 21st. In this way everyone will have enough time to create and print the best Star Wars gadget around. Hope this can solve any issue around the competition. If you’ve any question, please ask’
Hi Wes, really sorry for failing to get back to you in due time. Fair point though, we’ll make sure to communicate the exact details of of when a contest ends moving forward. I do hope you got to enter the competition in the end! Thanks for understanding
1 Like
Hey @GIFT3D , albeit too late, let me to clear things for you. Multiple entries are definitely allowed, whether in the same comment or not, otherwise we would have mentioned it in the competition brief. Hope this helps.
Hey @tanwalin @edthomp @ItsATrap , thanks for your input. Let me start by saying that we certainly weren’t pressured in any way to end the contest sooner. I do agree however that we could’ve handled this contest better, and as one of the largest competition we hosted on Talk, there’s definitely a lot to learn from the experience.
@tanwalin I’m sorry you didn’t get to show us your project! I hope you’ll still share it with the community here on Talk.
Cheers
