You need to credit the original artists when you take them. So your true entry is the Lars. You should only apply with that. Taking someone’s model and adding a cylinder isnt that hard…
Hi everyone,
This is my R2-D2 which was designed from scratch and printed off on my Da Vinci AiO printer at 100 microns. I do apologies for such a late entry and fully accept that I may have no chance of winning, but after spending days and days modelling the fantastic R2-D2 I thought I would enter the competition to show my creation.
It was printed in 7 parts, then assembled. The body was glued, with the head, while the legs were connected with joints, allowing it to pivot. All of these files are attached to this comment and may be scaled up to an appropriate size.
After reading a few of the comments I have come across a few complains highlighting that this competition requires a 3D printer in order to win another. I fully understand what many have said, but I would like to say that you may use the 3D hubs service. For future projects that anyone has I would be delighted to offer my assistance with my hub GIFT3D.
I hope that you all enjoy my project
To all over participants, MAY THE FORCE BE WITH YOU.
R2-D2 Back.stl (319 KB)
R2-D2 Head.stl (412 KB)
R2-D2 Joint.stl (6.14 KB)
R2-D2 LeftLeg.stl (164 KB)
R2-D2 Front.stl (730 KB)
R2-D2 RightLeg.stl (164 KB)
bonjour, je voudrais ajouter ce modèle à la concurrence. Modelé et imprimé pour l’occasion.https://www.youmagine.com/designs/ewok 5
“Ewok”
x: 104.49mm
y: 91.24mm
z: 96.09mm
imprimante: Dagoma discovery200
PLA
EWOK.stl (29 MB)
First Order
RTS-002 (Radar Technician Scanner Mark2)
This device is used by certified radar technicians on all First Order land or space-based transportation and military base support. It is designed to help quickly diagnose and repair flaws in the complex radial patterns that are produced when locating and tracking various types of vehicles and life forms.
This mark 2 design was implemented as a mandatory replacement for the mark 1 due to numerous flaws in design and functionality that was discovered by First Order leader Kylo Ren after his experience using the device during an undercover Starkiller Base recon operation as a radar technician.
Since implementation, there has been a lot of disagreement from First Order radar technicians about the new scanner and have expressed frustration that the functions are more cumbersome than the original design and have other highly questionable features that are deemed unnecessary, such as a described “loud creepy and raspy voice” that indicates when a scan completes as well as another button that no one in the First Order can explain, only that it produces what some call a strange electronic breathing sound with no known diagnosis or repair function. First Order Leader Kylo Ren refuses to discuss making any further changes to the design and has threatened sanitation duty to anyone who argues against any aspect of it.
Note from the designer - Kylo Ren
“The radar scanner I have put in place within the First Order is something I am most proud of. I would consider this to be the Grandfather of all scanners we have ever produced. I am also satisfied in how simple this device is to use. With a simple voice command ‘Show me’, the device will scan for any and all problems known from our vast troubleshooting holocron and then uplink to the scanner the most effective solution to mitigate error on the technician’s part.”
Case Study - Anonymous First Order Radar Technician**
This has to be one of the worst updates I have ever seen made to our scanners. Before the mark 2, we had a simple one-button diagnosis with a singular holo-readout that mapped out the source for where radar pulse blackouts happen. The mark 2 doesn’t completely work right. Also In the instruction guide there is supposed to be this ‘show me’ command, but it doesn’t do anything! It just sits there and never comes back with a proper diagnosis. I feel like i’m staring at something that adds no value to my job. Thankfully the green button is there as a manual press function that the mark 1 had.
The scan confirmation voice feedback thing is very annoying and loud. There is no way to override it into a silent mode. One of the buttons sounds like someone having a severe case of a loud breathing and have yet to get any answer as to what that even functionally does for us technicians. No one can give me a straight answer on this and rumor is the last person who did know this scanner inside and out was killed in an unfortunate freak accident in the manufacturing unit which also destroyed every mark 1 scanner and device blueprint to make more, so without a proper field testing area we continue to have to use these scanners without full training on the device.
** The anonymous individual is now deceased.
The following link below leads to the RTS-002 YouMagine page:
http://www.youmagine.com/designs/rts-002-radar-technician-scanner-mark-2 5
Please note that all the .stl files are in the ‘RTS 002’ zipped folder at the YouMagine page.
Happy 3D Printing and may the Force be with you!
RTS-002_Assembled.stl (4.58 MB)
Thank you 
I created it specifically for this contest. I don’t expect to win, and never did but your support means a lot to me.
Awesome out of the box original thinking! 5 stars from design to paint. This is memorabilia that deserves a place on my wall next to the DL-44.
Hi Ryan,
I recently downloaded the RTS-002 at your YouMagine page and I was impressed with all the work that you put behind this project. I’m not the biggest Star Wars fan but I instantly recognized the design elements from Kylo Ren’s lightsaber and Darth Vader’s mouth guard & chest box. I especially like how you integrated the First Order logo into the front end of the scanner. You have successfully created a unique design that is worthy of being part of the Star Wars galaxy and I’m sure that future ‘Matt’ cosplayers will enjoy this prop you have created. Congratulations and good luck on the contest!
Wes
