Silver Cutlery

lerallee · 2016-03-04T13:55:03.000Z

I have some old sterling silver forks that I would like to copy? What is the best way to achieve this. I have a silver smith you can copy off a mold? Thanks

CADNinja · 2016-03-04T14:40:49.000Z

Hi Lera, Depending on your location I can 3d laser scan the fork itself or the mold. You can mail me the forks. Not sure about the mold. Ft. Worth texas

3DBuildR · 2016-03-04T14:54:11.000Z

You could use the reverse mold copy service(need polymer clay impressions) from my hub.

lerallee · 2016-03-04T14:57:25.000Z

I am in Dallas near Downtown. If I brought you the fork what material would you suggest using - I would then send my silver smith… THX

3DBuildR · 2016-03-04T15:10:01.000Z

If you already have a mold, then it is even easier. Any soft mold material(as soft as modeling clay) is fine. The best resolution I could do is 0.05mm(much more than most laser scanners). The scan is insensitive to reflections(for silverware).

CADNinja · 2016-03-04T15:31:18.000Z

The other hub 3DbuildR appears to have a better scanner than mine

CADNinja · 2016-03-04T15:32:03.000Z

please send me your contact information to jeffopel@ncscompany.com

Silver Cutlery

Silver Cutlery

created

last reply

replies

views

users