1

Hey guys I’m selling my Qilive 3D printer here in the Netherlands and wanted to know if anyone here is interested. I’ll seel it for who gives 450. This printer new costs around 1000 euros in Portugal. It comes with a 0.4mm nozzle which allows it to get up to 100 microns resolution on Z axis. It has near to none stepper whine. I’ve also just readjusted the belts and lubricated all the rods.

The reason I’m selling this printer is because I want an ultimaker.

If you want more info just contact me.

IMG_20160915_113809.jpg
IMG_20160915_113809.jpg4160×3120 1.35 MB
IMG_20160915_113836.jpg
IMG_20160915_113836.jpg4160×3120 1.12 MB
IMG_20160915_113848.jpg
IMG_20160915_113848.jpg4160×3120 1.26 MB
IMG_20160915_113816.jpg
IMG_20160915_113816.jpg4160×3120 1.05 MB
IMG_20160915_113759.jpg
IMG_20160915_113759.jpg3120×4160 1.57 MB
IMG_20160915_113755.jpg
IMG_20160915_113755.jpg3120×4160 1.29 MB
IMG_20160915_113750.jpg
IMG_20160915_113750.jpg3120×4160 1.12 MB
IMG_20160915_113743.jpg
IMG_20160915_113743.jpg4160×3120 1.6 MB
IMG_20160915_113432.jpg
IMG_20160915_113432.jpg4160×3120 1.02 MB
IMG_20160915_113404.jpg
IMG_20160915_113404.jpg4160×3120 843 KB
IMG_20160915_113243.jpg
IMG_20160915_113243.jpg4160×3120 963 KB

1 Like