1

Hello,

am currently thinking about selling my Sigma R17 (Germany, shipping in EU included).

The reason is that I never really use the dual feature and only print small things. So a small single extruder would be more than enough for me.

  • It is about a year old (bit more).
  • It has the Bondtech Extruders installed on both extruders. For the Bondtechs a little block is installed for the endswitch. This may not be modified as this is precisely fitted to guarantee proper positioning without hitting anything!
  • It comes with a printed extended filament holder for 1 kg filament roles.
  • It comes with two 0,4 (installed left) and 0,6 (installed right) Nozzles and an extra second glassplate.
  • I have printed a lots of successful prints. I had a few issues with skipping filament which got a lot better with the Bondtech Extruder. This is due to the filament used. Not all brands are good.
  • It has the new firmware 1.2.7.
  • It comes with a few (partly used) roles of 3mm Filament as an extra as most small printers use 1.75. All filaments were kept in sealed plastic bags with Silica.
  • It is used, in good condition and is fully functional. It has a few optical usability signs but is 100% functional. I do clearly express that this printer works.
  • I also made a little custom webcamcase that can be mounted and I don’t need anymore. It has a Logitech webcam inside. Great for timelapse videos.
  • The original packing/carton is available for shipping.
  • Oh yes, and it is called Rufus as seen on the Picture!
  • I noticed that during this heatwave (about 35° in my room) printing is a bit more difficult than when its cold. Also the belt tension may need to be readjusted when it cools off again.
  • As this is a private selling I do not give any sort of support or guarantee after purchase. There are tones of tutorials and how-to’s on the internet for support.

I am not sure what to ask for it. The printer is still at about 2500EUR new. The Bondtech extruders are about 300EUR each (so 600EUR for both).

dsc_0757.jpg
dsc_0757.jpg1024×768 169 KB

2

Hello, if still available what is your final price ? do you ship to italy ?
thanks Davide