1

Hello, I am looking for a complete teardown or diagram of the internal workings of the Projet 660 Pro.

2

You’re welcome to visit our NYC Lab. I have two 3D Systems ProJet printers I can show you, a MJP 2500 and a CJP 660Pro. Roger

3

Thank you but it will be a while till I’m able to make it to the East Coast. We have 4 660 pros here at Sci-Arc that I work on every week. I just would love to have a tear down of the hose system in order to diagnose leaks.

4

I am very interested in that!

5

Let me see what I can dig up without upsetting 3D Systems.

Something like this would be very helpful I assume? Disclaimer…I cannot verify the source of this image, but I assume this is what you’re looking for?
https://static.webshopapp.com/shops/049875/files/032084198/600x600x2/3d-systems-service-station-assembly.jpg

6

Thank you for the clean squeegee station tear down. I would love to see anything you dig up on the hose system.

7

Please email me directly, and I’ll share what I can.

Roger

ROGER LIUCCI

rliucci@microsolresources.com

3dprinting@microsolresources.com
BIM & 3D PRINTING SPECIALIST
MICROSOL RESOURCES
NEW YORK | BOSTON | PHILADELPHIA

212.465.8734 | 617.861.8870 | 215.557.0770
microsolresources.com

8

Maybe this is something of interest: