Hi;
When i print something its 3mm smaller in every axis.How can i fix it ?
Printer: Prusa i3 MK2
Software: Simplify3d
Odd, S3D works fine for me on the MK2. What printer profile are you using?
I would suggest going to this link and getting the file RC4.fff.zip that is in the first message. Good overall settings for the MK2.
1 Like
I’m using the profile which recommended in prusa website and i dont’ think the problem is about the software because the same problem happens in cura / prusacontrol / slic3r
I have a similar issue with both my printers. I solve it by scaling the part by .04% on one and .05% on the other. I found the proper percenage by printing a 100mm square. I only printed it 10mm high. Then I measured the print and did the math. My turned out to be off equally on each axis. If you only have one printer then S3D has a way for you to import the scaling every time. In my case it is different for each printer so I have to do it manually. I have just made it part of my setup routine.
