Printing Ninjaflex in London

Robin_Baumgarte · 2015-11-18T12:24:50.000Z

Hey! I’d need to print some flexible pieces using Ninjaflex. Who can do that in London?

IPF3Dprinting · 2015-11-18T13:44:00.000Z

Hey Robin! Won’t be doing until Ninjaflex until December, but do have Polyjet flexible Tango material at the moment if that is any good to you? Comes in Shore A hardness 27, 40, 50, 60, 70, 85 & 95.
Drop me a line if I can help:

Georgei · 2015-11-18T13:45:45.000Z

Hi Robin,

I haven’t try yet printing Ninjaflex in my printer but I do not see any reason not to try it. The printer is capable (direct drive extruder very close to the hot end). I might have to play a little with the temperatures and make a couple of dummy runs.

If you are interested please contact me. Thank you, George

marcnicol · 2015-11-18T13:59:32.000Z

Hi Robin,

I have Ninjaflex, Filaflex and Flexsolid in stock and get good results on my Printrbot Simple Metal with the new premium geared extruder. I don’t keep a huge range of flexible filament as there is not much demand, but I have a few colours in NinjaFlex & Filaflex. What are you looking to print and what colours do you need?

Cheers,

Marc

LewisFleming · 2015-11-18T15:27:17.000Z

I can depending on the size of the print, what size print are you thinking?

gabriela3d · 2015-11-18T16:15:00.000Z

Hey @IPF3Dprinting, just a heads up that I moderated your email out. Now that the user profiles are live, it’s quite easy for other users to find your Hub and message you through the Contact This Hub link. Just one click away Thanks for understanding.

On that note, make sure you add Ninjaflex prints to your Hub page when you get the page. It’s a great way to showcase the filaments you specialise in. Cheers!

Robin_Baumgarte · 2015-11-18T22:21:37.000Z

I’ve uploaded it now to Thingieverse: Spring Joystick Head by RobinBa - Thingiverse

It’s basically a partly hollow cylinder, 25mm in diameter and 35mm high.

Robin_Baumgarte · 2015-11-18T22:22:19.000Z

Hey Marc,

I want to print a type of joystick knob, about 25mm diameter and 35mm high. I’ve printed it before at the Hackspace London but now their printers are down. What colours do you have? I’d be happy to experiment.

I’ve now uploaded it to Thingieverse: Spring Joystick Head by RobinBa - Thingiverse

Robin

marcnicol · 2015-11-19T09:38:41.000Z

Hi Robin,

That looks straightforward enough. I’ve got black, white or orange Ninjaflex and grey or red Filaflex. I also have Flexsolid and Bendlay in clear/white if you’re after something a little less flexible.

Cheers,

Marc

Robin_Baumgarte · 2015-11-19T17:21:01.000Z

Cool. Roughly how much would each cost?

marcnicol · 2015-11-19T19:17:23.000Z

Hi Robin,

It works out at about £9 for one or about £12 for two. Shipping is £2.50, but obviously you’re welcome to collect if you’re local. I’m in SE7.

Cheers,

Marc

Robin_Baumgarte · 2015-11-20T11:39:02.000Z

Cool. If I’d need more, say 10, would the cost decrease further?

marcnicol · 2015-11-20T14:59:07.000Z

Hi Robin,

Definitely, I could get it down to £4.50 each for 10. What colour are you after?

Cheers,

Marc

Robin_Baumgarte · 2015-11-20T15:24:15.000Z

Hi Marc,

Would a mix be possible? I’d prefer a variety of different colours. The ones you mentioned for Ninjaflex and Filaflex would be fine.

Robin

marcnicol · 2015-11-20T16:37:37.000Z

Hi Robin,

That would be fine. So 5 colours, 2 of each? If you head over to my hub and start an enquiry I can convert it to an order for you.

Cheers,

Marc

champion3d · 2019-06-28T10:33:02.576Z

Hi Robin,

We offer NinjaFlex 3D Printing, it’s one of our specialities actually. We’re based in SE6 and offer next day, same-day and weekend 3D Printing. Find us here https://champion3d.com/3d-printing

Printing Ninjaflex in London

Printing Ninjaflex in London

created

last reply

replies

views

users

likes