Hey! I’d need to print some flexible pieces using Ninjaflex. Who can do that in London?
Hey Robin! Won’t be doing until Ninjaflex until December, but do have Polyjet flexible Tango material at the moment if that is any good to you? Comes in Shore A hardness 27, 40, 50, 60, 70, 85 & 95.
Drop me a line if I can help:
Georgei
3
Hi Robin,
I haven’t try yet printing Ninjaflex in my printer but I do not see any reason not to try it. The printer is capable (direct drive extruder very close to the hot end). I might have to play a little with the temperatures and make a couple of dummy runs.
If you are interested please contact me. Thank you, George
Hi Robin,
I have Ninjaflex, Filaflex and Flexsolid in stock and get good results on my Printrbot Simple Metal with the new premium geared extruder. I don’t keep a huge range of flexible filament as there is not much demand, but I have a few colours in NinjaFlex & Filaflex. What are you looking to print and what colours do you need?
Cheers,
Marc
1 Like
I can depending on the size of the print, what size print are you thinking?
Hey @IPF3Dprinting, just a heads up that I moderated your email out. Now that the user profiles are live, it’s quite easy for other users to find your Hub and message you through the Contact This Hub link. Just one click away 
Thanks for understanding.
On that note, make sure you add Ninjaflex prints to your Hub page when you get the page. It’s a great way to showcase the filaments you specialise in. Cheers!
I’ve uploaded it now to Thingieverse: Spring Joystick Head by RobinBa - Thingiverse
It’s basically a partly hollow cylinder, 25mm in diameter and 35mm high.
Hey Marc,
I want to print a type of joystick knob, about 25mm diameter and 35mm high. I’ve printed it before at the Hackspace London but now their printers are down. What colours do you have? I’d be happy to experiment.
I’ve now uploaded it to Thingieverse: Spring Joystick Head by RobinBa - Thingiverse
Robin
Hi Robin,
That looks straightforward enough. I’ve got black, white or orange Ninjaflex and grey or red Filaflex. I also have Flexsolid and Bendlay in clear/white if you’re after something a little less flexible.
Cheers,
Marc
Cool. Roughly how much would each cost?
Hi Robin,
It works out at about £9 for one or about £12 for two. Shipping is £2.50, but obviously you’re welcome to collect if you’re local. I’m in SE7.
Cheers,
Marc
Cool. If I’d need more, say 10, would the cost decrease further?
1 Like
Hi Robin,
Definitely, I could get it down to £4.50 each for 10. What colour are you after?
Cheers,
Marc
Hi Marc,
Would a mix be possible? I’d prefer a variety of different colours. The ones you mentioned for Ninjaflex and Filaflex would be fine.
Robin
Hi Robin,
That would be fine. So 5 colours, 2 of each? If you head over to my hub and start an enquiry I can convert it to an order for you.
Cheers,
Marc
Hi Robin,
We offer NinjaFlex 3D Printing, it’s one of our specialities actually. We’re based in SE6 and offer next day, same-day and weekend 3D Printing. Find us here https://champion3d.com/3d-printing
