print+

zippi · 2015-09-29T14:55:00.000Z

There should be more projects like that!
I really love the idea of selling electronics and the 3D files so you can print it yourself and assemble it

printplus_diy · 2015-09-30T08:18:43.000Z

1. is answered

2. there sure is, we will be in touch later today via email.

printplus_diy · 2015-09-30T08:26:52.000Z

Cool! Alex enjoyed himself and told great stories about Uprise Festival involving a guy in a bear costume, Justin Bieber on repeat and @Mats_R__Jakobse wanting to take home the pink headphones. Alex did tell - everyone - was into JB - even Marvin - haha. All jokes aside, great that you guys liked the headphones and that people could get to learn more about print+

printplus_diy · 2015-09-30T08:28:00.000Z

Merci bien Nicolas!

printplus_diy · 2015-09-30T08:32:18.000Z

Merci beaucoup Simon!

GloomySparker · 2015-10-01T08:27:18.000Z

Et en ce qui concerne le fait d’être revendeur?

… oops… pas vu le précédent reply! On oublie donc ce commentaire! Désolé

printplus_diy · 2015-10-01T08:34:02.000Z

Dominique! I am sending you an email right now

nakwada · 2015-10-01T08:54:53.000Z

Can I be part of it too, please ?

printplus_diy · 2015-10-01T08:57:02.000Z

Hi Simon, just sent you an email as well

GloomySparker · 2015-10-01T09:15:16.000Z

Some will say I am a bit too in the urge but I do not want your mail to be considered as a SPAM.

I did not have the mail yet. From where and to where did you send it?

Thanks

nakwada · 2015-10-01T09:19:17.000Z

Hi !

Got it, thanks a tons

printplus_diy · 2015-10-01T09:23:23.000Z

From [at] print.plus to info [at] gloomyspark.com. I had to do some googling, so this could also not be your address. Otherwise send me a message with you contact information.

GloomySparker · 2015-10-01T09:34:22.000Z

Shame on me… info was not created… This has been done now. My direct email is dvienne [at] gloomyspark [dot] com

Please apologize

Your email is not fully displayed in the message

martinv77 · 2016-01-13T20:16:11.000Z

Hi There How do I get my hub certified. To Print+ these headphones.

I signed up a couple of times via the kickstarter page, but so far I have not seen any further communication.

Thanks,

love the project

GloomySparker · 2016-01-14T09:16:15.000Z

print+ STL files are still beta but somebody of the team could give you more information

martinv77 · 2016-01-20T22:45:51.000Z

I got the link to the beta files and I’m making some prints to test. Would however like to see some additional info on the plans on 3D hubs certification and timelines if any are available…

printplus_diy · 2016-01-21T08:56:37.000Z

Hi Martin, sorry for not getting back to you earlier, notification of your earlier post got lost in our mailbox. 3D hubs certification plans are in development - expect to hear about them in March. Until then we have our hands full on test printing our parts on different printers / materials, improving the 3D print files and getting parts in production / produced. With everything we learn in the coming period we will better be able to get 3D hub certification right, as we know what type of 3D printer / material combinations are best suited for hub certification. Hope this answers your question.

martinv77 · 2016-01-21T12:38:51.000Z

Well that helps a lot, thanks… Im not known for being patient so sorry for pushing.

Thanks again for the update.

StudioRaket · 2017-03-27T16:13:36.000Z

Heya guys, any chance I can find the STL files of the headphones to make testprints?

Many thanks!

Sandra999 · 2017-04-22T09:28:15.000Z

with a user friendly user interface and also touch-pad controls. fleck 5600sxt water softener manual This is a continuous surveillance that is immediately done.