NY Proto-pasta Special Filament RoundUp

[BluesoulX12]

As long as you don’t sit on them or need to put them in a case you should be fine! Here is the prototype. This was with an experimental ABS setting. I’m going to tighten up the model and settings and put it through its pace tonight.

[boydconnor]

This is awesome, Michael! What else have you tried printing with it? Didn’t get a chance to play with the material yet, but i’m very intrigued. How easy is it to print with it really and how much stress does it place on your printer? Cheers

[Nikki]

And now to get one of these workshops too you too with @

[AlexDick]

@Michael_Lowry coolest toolbox ever! Nice sticker

[AlexDick]

Just got our first reseller in Australia, Bilby3D, this month! Australia needs more Proto-pasta, but why is Australia so far away?

[AlexDick]

@jiangchao Nice, we wanted to keep the processing straightforward and similar to standard PLA

[AlexDick]

@jiangchao Fun, might want to do a clear coat or put something between your skin and the CFPLA. Depending on how sensitive you are, it can get a little itchy…Great work! Keep it up!!!

[BluesoulX12]

It’s surprisingly not itchy although I’ve only worn it today since I had to iron out some printing properties. Here’s the final version.

[AlexDick]

@jiangchao But I want to see a picture with you wearing them

[BluesoulX12]

There ya go. They exist !

[Michael_Lowry]

Thanks! it hasn’t really stressed my printer at all though i’ve only gone through a sample pack’s worth. It was very easy to print with and used all the standard settings. Some tweaking may be needed for certain geometric conditions, but this largely did not affect print quality.

I have printed a few implant models for work using it, and these are meant to be show-pieces for investors. I haven’t polished them successfully yet but I hope to get better at that with practice.

[Michael_Lowry]

The Hoboken MakerBar would love to have them! we are actually hosting the MarkForged printer tomorrow, and have hosted a few other companies including SeeMeCNC. @, let me know if you are interested!

[Nikki]

Awesome! ‘Framed by ProtoPasta CF’ - looking good!

[AlexDick]

@Gianmi Glad you found Proto-pasta so easy to print! Ease of print with standard settings is a requirement at the top of our list So to be hosted, do we have to physically visit NJ? I’m not again it, but that’s a long way for us West Coasters

[BluesoulX12]

Still no itch after 2 weeks of wearing them straight. Gotta say they’re actually quite comfortable. I’ll try a few more iterations. If anyone needs makergear m2 settings let me know.

[Nikki]

If you’re in Boston this weekend and missed the New York ProtoPasta Special Filament Workshop there are still a few spots left to join @Alexander_8 and the Boston crew on Saturday. You can grab your ticket & sample pack here: https://www.eventbrite.com/e/3d-hubs-protopasta-special-filament-workshop-boston-tickets-17526926509

Hope you can make it!

Nikki

[gabriela3d]

That would be awesome, @jiangchao! Why don’t you start a separate thread with details on how to print your own pair of glasses, from your experience? Make sure to share the design file as well, so people can immediately start working on them

[Nikki]

Nice idea!

[AlexDick]

@jiangchao Great news! You should try some stainless steel temples. You could create some great contrast with unfinished, brushed, or polished steel to contrast the carbon. Also, the added weight might keep the frames COG back towards your ears so they are less likely to fall off when leaning over? Just a thought…can’t wait to see what you come up with!!!

[Michael_Lowry]

Battlestar Galactica Pyramid Card box in stainless steel!

OpenSCAD model to create the box.

Polished er this looks really awesome but it’s hard to photograph in such a way that showcases the shininess.