Skip to main content
Looks good! This is quite a large ‘model’ - what type of scanner did you use for it?
Can you explain how you scanned it and produced a printable model. Apps used etc…
I used the Sense Scanner from Cubify http://cubify.com/compare/scanners?gclid=CjwKEAjwitKtBRCt3uOYsY2v7FASJACJU5XsR4AUBWpvFrHIHHsiu5_GDcTuCCbb9NeW-iqw0oam9BoC41zw_wcB
then did my edits in the new 3dbuilder from Microsoft
I used the Sense Scanner from Cubify http://cubify.com/compare/scanners?gclid=CjwKEAjwitKtBRCt3uOYsY2v7FASJACJU5XsR4AUBWpvFrHIHHsiu5_GDcTuCCbb9NeW-iqw0oam9BoC41zw_wcB
then did my edits in the new 3dbuilder from Microsoft
Hey looks nice! How much time does it take to clean up the model?
Great thing about the Sense Scanner, it cleans as you scan unlike anything with the Kinect. Also no power cord. this scanner is powered off of the usb. as the scan is in progress you get directional feedback to allow a great scan with a bit of practice. This model was clean as it finished. the only trim I did was a plane cut at the base. and if you print the files I uploaded you will need no support material
I have ranged the funds for my next 3D scanner
Great result. Love to see more examples.
26 days later
very cool