In Baltimore area need item scanned then printed

Wanda_Cherry · 2016-06-18T16:13:05.000Z

I have a broken latch I would like to get made, but I do not have a 3D printer or capability to upload a 3D file.

What can I do? This seems the perfect answer to a discontinued part. On the attached photo I need the larger part, the smaller I found online just not big enough.

Help!

Thanks

Cherry part.jpg1627×2730 1.39 MB

SEPINT · 2016-06-18T17:25:57.000Z

I got scanning capabilities, I’d have to guess some dementions because we don’t have the whole complete part? It needs the bottom peice? Let me know, we can talk over the phone too sometime.

Moolean · 2016-06-18T17:58:50.000Z

Part is simple and any CAD modeler should be able to rebuild this easily. What you want to do is provide precise measurements for each feature. If certain features of the latch aren’t as important to get accurate, then it will simplify the job of the modeler person. Also, you want to specify what material you want this printed.

AryaVenugopalan · 2016-06-18T18:01:07.000Z

I’ll do it. Could you please send me the parts?

AryaVenugopalan · 2016-06-18T18:01:55.000Z

Also, you could take a pic with a mm ruler on the frame

AryaVenugopalan · 2016-06-18T18:02:48.000Z

Modeling your part would be a MUCH easier way to go. I can have it ready in 45-50 mins

Wasatch · 2016-06-18T20:18:37.000Z

I was going to say the same thing as Arya … Pretty easy to model and print with the part or at least as many detailed measurements as possible. I suggest HIPS (high impact polystyrene)

Wanda_Cherry · 2016-06-18T21:11:00.000Z

Where should I send the parts? The smaller is the complete version I just need it in the size of the larger piece.

AryaVenugopalan · 2016-06-18T21:14:17.000Z

How about this: Call me 6103083219 and we can talk addresses, this is public so putting my address out there isn’t the greatest idea.

Atome3D · 2016-06-19T01:26:30.000Z

Hello Wanda ,

you must send us the latch so we modeling in 3D .

We 'll print and send it by mail

Regards,

Benoit - France Atome3D

b3dsolutions · 2016-06-19T13:38:10.000Z

I can scan, model and print in in reinforced carbon fiber…near break again

thanks,

Brian

dirdim · 2016-06-19T14:12:11.000Z

We’re 20+ year 3D scanning experts right here in Baltimore! We don’t print in-house but we know a great local printer source for this. Happy to take a look at this for you. Go to www.Bmore3D.com for contact info. We’re in Owings Mills.

Talea3D · 2016-06-20T08:55:56.000Z

Hi Wanda, we can scan, modeling and print with our ProJet 3510SD. We have two materials,VisiJet Crystal and Visijet X.

Sen us an email

3dprinting@talearestauro.it

Regards,

TALEA

http://talearestauro.it/modellazione-3d/additive-manufacturing.html

svt04cobra · 2016-06-20T13:27:52.000Z

I can have this part made for you in about 3 days. I just need the exact measurements and how you want to pay for it. Since I am not a graphic artist, I

Would put the job up for bid (Approx cost for file would be about $35) then I would be able to print it for you and mail it to you. Total cost would be about $70

with shipping included. Please let me know and i’ll get started on it.

Wanda_Cherry · 2016-06-21T15:51:46.000Z

Where shall I send parts? How much will all cost?

AryaVenugopalan · 2016-06-21T17:37:56.000Z

I’ll do it for fifty bucks. All included

Wanda_Cherry · 2016-06-23T02:34:03.000Z

Just need to sort out details. Payment where to send my parts for scanning.

Wanda_Cherry · 2016-06-23T17:20:54.000Z

Just need to sort out details. Payment where to send my parts for scanning.

Wanda_Cherry · 2016-06-23T17:28:56.000Z

Thanks I will give them a call