I’m having a problem with one of the chips is missing, if someone can help me telling me what is the name or the readings value measured with a multimeter of the chip. The chip that I’m talking about is the one on the bottom of the heated bed with an “R29” next to it.
Do you have the schematics for your system? “R” usually designates a resistor. Not all resistors are populated. Or it may be populated on some boards. You really need to check if it should be there.
I believe that is missing that because the Dreamer indicates me that the sensor of temperature of the heating bed isn’t working and I all ready double checked the wires, the conections, parameters of reading and its all okey except of that part
