3D Hubs will hide you hub if the parts are to big for your printer, so you will never have to decline beacuse of size.
1 Like
Thats not correct. Ive got orders a few times too big. People could also select my small printer with an order too big for it.
7 Likes
cobnut
November 7, 2016, 4:46pm
7
Hi @Boelle 3DHubs filters orders that won’t fit on your machine, so you never get to see the “lost” orders because of bed size (or material, etc.), that’s what interests me the most, how many orders could I get if I had a different printer or offered different materials?
The shop thing for me is a combination of factors, but it’s mostly one of physical space. I’m printing from home right now and have room for only two printers in my office, add in the filament storage and it’s pretty cramped. I’m also concerned about the odours and fumes, etc. For example, I doubt it would be practical for me to have an SLA printer because of the requirement for cleaning the print, I really can’t do that in the kitchen sink post order point of view, but I wonder if there’s also an opportunity for “walk ins” if people can actually see a printer working in a window somewhere.
I’ve been wondering whether it’s worth looking for like-minded others in my area who might consider getting together to operate a “mini hub” where 4 or 5 of us would have space to work and present a professional front.
I can assure you they do. I don’t believe there is any margin, however. Try to upload a huge part and you will see that the nearest hub is 100+ mi away.
My mendel90… looking at it now… dont see build volume anywhere… nor for my offline K8200
so i just go hmmm
as i just wrote… there are no build volume settings for my printers so how can they know?
cobnut
November 7, 2016, 6:12pm
11
@Boelle build volumes for printers are not secret, they’re public knowledge, no need for them to be set anywhere on the site to be edited, they can be part of the internal printer profile. I’d imagine that’s one reason why printers are chosen from a drop-down list when you set them up.
I’m sure @Asad3D can tell us whether print volume (and any other settings) are taken into account when filtering orders…
1 Like
This is definitely a known quantity. When I wanted to add a new printer they didn’t list they asked for help in getting the specs for it which included build column. It make sense that there are printer parameters which we can’t alter on here.
1 Like
DaveOB
November 7, 2016, 8:08pm
13
My modified i3 has a build height of 650mm and I could not get a 3D Hubs quote from my own hub as the standard i3 ( that I started using ) was too small for the part I wanted to print. I had to ask 3D Hubs to add the custom printer to the list of printers ( which they kindly did after I verified the specs ).
Asad3D
November 8, 2016, 8:37am
14
Hey @cobnut , print volume is indeed taken into account when filtering orders/hubs. Hubs with printers that cannot accommodate the print volume of the part will be filtered out, although there is a margin for a few percent here and there. Hubs with multiple printers - say, one printer that can accommodate the print volume and one that can’t - will have the latter printer filtered out but will certainly show up in results. I hope that info helps!
cobnut
November 9, 2016, 1:14pm
15
Hi @Asad3D thanks for the confirmation, it did seem to be a logical thing for 3DHubs to do…
However, does this mean I must copy all my materials to my new printer that has a larger build area? My current printer uses the same size filament and can print all the new one can in terms of materials, the only difference is build area and minimum layer height. I did think I’d be able to get away with just adding one new layer height (in each material) for the new printer but I’m thinking now this will exclude me from the larger build area orders who want larger layer heights, so I’ll have to replicate all my materials, at all layer heights for the new printer?
Joerg_4
November 9, 2016, 1:16pm
16
well, I had the same thoughts and therefore bought an Rostock Max V2, approx. 11 months ago.
Since the printer is online I didn’t receive a single order order that was just close to fill the build volume - so for me the investment was not productive.
cobnut
November 9, 2016, 1:39pm
17
Interesting @Joerg_4 , thanks (although I’m sorry to hear that!). I wonder is that’s because of the limited square build volume? Even in the limited orders I’ve had, I’ve had a couple that may not have fitted the round bed of the Rostock. The largest I’ve had was 220mm x 140mm which (unless I’m mistaken) would be quite a bit outside of the Rostock’s capabilities. The 280mm diameter sounds huge, but the 197mm square limit could be an issue…
No proof, just wondering!
1 Like
Joerg_4
November 9, 2016, 1:45pm
18
@cobnut
sounds correct, may be this is the reason.
We’ll find out soon, as I am also about ordering a Prusa i3 Mk2
cobnut
November 9, 2016, 1:59pm
19
Excellent @Joerg_4 , it seems like a decent part of the Prusa backlog is just people on here
Well, you just realized pretty quickly how primitive your “virtual” hub is…
there is very limited things you can do with your hub and there is zero feedback from 3D hubs.
my advice is to get the biggest build volume you can and list all the filament that you have in stock and that you feel you can print reliably.
When will we be able to list precise print volume? Having a list of generic printers is not applicable to everyone, a huge number of 3D Hubs will be using either custom made machines or heavily customised machines, where the build volume might be larger or smaller than the machine on which it is based.
Asad3D
November 14, 2016, 2:08pm
22
Sorry for the late reply @cobnut - it is recommended that you copy your materials, layer height etc. for your new printer, particularly if it has a larger build volume.
cobnut
November 14, 2016, 2:19pm
23
Cool, no problems @Asad3D .
You can do that now! 3D Hubs accepts custom printers as long as the quality is up to par.
