I just triple-checked some things and noticed that (at least with this order, which was already having TBD issues before that was miraculously fixed) this quote is not being calculated correctly… or maybe it is? This is seriously super confusing, and way less intuitive than things used to be. My price for ABS is .75 per cubic cm. According to this order, this part is 5.7 cubic cm (or is that for all 4 parts??? Really unclear!). Either way, this new calculation system is all messed up…
I admit this is unclear. I went into the order an found the cause. If you hover over the “i” it says that typical FDM volume is 3,1cm3 and for most other printers it’s 5.7cm3. It shows the latter where it should have shown the first (bug).
Taking the 3,1cm3. We have 4 parts, so 4 x 3,1 = 12,4 cm3, multiplying this by 0.75 / cm3 gives $9.3, which is correct (there’s some rounding off in the shown volume so minor variation is possible).
So, admittedly, we need to fix the bugs, but you can be reassured that the pricing system itself is correct. Hope this solves!
This is still very counter-intuitive, and taking away the Hubs’ abilities to adjust part volume just seems crazy. Like others have noted in this and other threads, I have had to adjust the part volume on pretty much every order I have received (20+ orders) because the 3D Hubs estimate was not matching up with my part volume estimates (which come from my slicing software that I set up for my printer). This new system makes this kind of adjustment much more difficult and confusing, not only for your Hubs, but for customers who want transparency in their orders. Sorry, but these changes all just seem so sloppily implemented…
Cool, thanks. One feature I’d still like is to be able to offer “rush processing.” Right now, I just list my printers as multiples. Some with smaller lead-times but higher startup prices. Also, it is often confusing for people when I tack on fee for “parts cleanup.”
We should have “additional services.” Be a prompt at time of order.
Is it possible to provide hooks into the back-end slicing engine that 3D Hubs uses for estimating product sliced-volumes?
I imagine it would require a bit of work, but if you were able to do this, we could enter in our default slicing parameters on our printer pages and at least have the 3D Hubs estimate come closer to our own individual estimates.
It would also be nice to have an option for support material generation estimates, either by a checkbox or an automatic guess by the slicer.
In any event, we’ve lost an important functionality when we are no longer allowed to enter in our own sliced volume into orders.
Yes, we need to be able to manually enter values. Basically, all of my prints I end up manually reorienting and building support. So, an automated “support cost estimator.” Wouldn’t be super accurate either.
