I have only used Proto-Pasta CF PLA and it is some nice stuff but you MUST run it with some kind of hardened nozzle or your going to be burning through brass nozzles like candy if your not careful. I have also used XTCF20 and it is nice but not everyone can hit the temps required + it needs a heated bed, CF PLA not so much. Recently ProtoPasta came out with some “high temp CFPLA” so you can make high temp parts after annealing with the strength of CF + it is less prone to warp when annealing.
Skip to main content
hi i use aurarum carbon fibre i used over 2 kgs and still no problem with the nozzle if you think that is not true just re size your nozzle and change it in your print program rick
2 months later
