The thing about pp cf is it is not the typical cf, you don’t have the fibers overlapping so you don’t get the same look. But you definitely get a good alternative! Still worth playing with. I actually talked to the owner of pp about their cf and it’s not really stronger than abs, I used it to print a dji inspire camera mount so I could mount a 3d camera on it and the mount has held up very well! I printed cf on a makerbot 2x with a .4 tip and I didn’t have a problem at all. The only thing about the cf is that it is very abrasive! I print it with zero heat on a Fleks3d build plate without a problem. Protopasta offers around $7-10 off a sample spool, you get a good amount, or you can use your 3d hubs discount perks code. I would definitely get a sample spool.
Good eye! Yes I go to KSU. I don’t print all if these models, most but not all, I have a good relationship with the head chair of the Construction Management Department so I can get access to their Stratasys uPrint se and have a good relationship with the Shop Manager of the Architecture department so they let me toy with their Makerbot 2x. I have also done a lot of playing with my 2.0a to make it better, it also helps that I use Simplify3d. Some of the other prints I have, I have ordered on 3d Hubs. Sourced the community! Abassadors perks 
In response to you asking me to a PM.
Trying to send a PM on 3D Hubs is worse than filing taxes.
My email address is contact@solidprint3d.com
Thanks,
-Pat
I would love to test for you, if you could shoot me an email at christopherbrown0205@gmail.com or if you could give me some contact information I will contact you.
How about marble, brick, acrylic, and some others? I am the only official USA reseller of TreeD Filaments from Italy. They have a huge line of seriously unconventional filaments. Let me know if you want to buy some and check it out.
I will be ordering a new shipment here shortly. Check out my Facebook page Redirecting... and message me for prices and so I can order exactly what you want. 
Okay, just added. I actually saw you guys on Amazon yesterday, you were recommended for me! Good luck!
you miss polycarbonate, its the best material to get strong and sturdy parts with high temperature resistance. You can even get screw threads inside it easily.
This is the best PC i know, made in cooperation with the inventors of polycarbonate:
http://www.polymaker.com/shop/polymaker-pc-plus/ 2
try to find a reseller in your location and have fun with this great material.