Did you print T-Rex Skull?

UVic_3D · 2016-03-30T01:54:52.000Z

We’re currently printing the the T-Rex now… Finished the lower jaw and it turned out amazing. Just printing the skull portion now, but we’re focusing on producing a high quality result with as little finishing work as possible, so our printing time is ridiculously slow.

We’ll share pics when it’s done. Good luck with yours!

BIBO3Dtech · 2016-03-30T01:55:07.000Z

Thanks for your messages. Sorry for letting you misunderstand it. I am pleased, so I want to try to print it under support and see the printing effect:) Waiting for your printed result. Have a good day.

BIBO3Dtech · 2016-03-30T01:56:42.000Z

Sure, please kindly check it as below.

IMG_4646.JPG750×750 75.2 KB

BIBO3Dtech · 2016-03-30T01:58:41.000Z

Wow, thanks so much for your sharing:)

BIBO3Dtech · 2016-03-30T01:59:50.000Z

Sounds very good, and looking forward to seeing your printed result and pictures:)

BIBO3Dtech · 2016-03-30T02:11:49.000Z

We also printed the size at half without support. The teeth is not perfect that we have thought. You can check the picture as below. Yes, we printed more than 13 hours at the original size skull. Thanks so much for your sharing and suggestions. We will try to print it again with support:)

IMG_4627.JPG1280×960 188 KB

TOMMY666 · 2016-03-30T03:01:22.000Z

wow

Iceman24k · 2016-03-30T03:36:33.000Z

I love it!

Sammi3Dtech · 2016-03-30T05:22:18.000Z

Me too

BIBO3Dtech · 2016-03-30T05:23:13.000Z

Thanks!

BIBO3Dtech · 2016-03-30T05:23:45.000Z

Me too;)

GIFT3D · 2016-03-30T09:52:19.000Z

Hi again,

I just want to say that the hollow inside of the skull is rather hard to remove the supports from. Good luck with the end result.

GIFT3D · 2016-03-30T09:55:35.000Z

I just want to say well done to all those who printed the T-Rex skulls. They all look amazing!

BIBO3Dtech · 2016-03-31T00:17:01.000Z

Thanks so much for your support Can you show me your T-Rex skulls under support? Thanks in advance.

GIFT3D · 2016-03-31T05:50:09.000Z

Unfortunately I have already removed the supports so cannot take a picture with them on. Apologies

BIBO3Dtech · 2016-03-31T05:59:22.000Z

Hello GIFT3D, it is ok. Thanks so much for your reply and support:) Have a good day!

GIFT3D · 2016-03-31T07:09:34.000Z

I’m glad I could help. You have a good day too. Good luck 3D printing

UVic_3D · 2016-04-01T18:06:31.000Z

Needs a bit of finishing work before painting, we’ll post a finished pic when done. Exam season, so might be a little bit. No supports 100 microns ColorFabb Standard White

IMAG0988_0.jpg2688×1520 806 KB

BIBO3Dtech · 2016-04-02T00:45:52.000Z

Wow, looks amazing. What is this printed size? Good luck to your exam:)

UVic_3D · 2016-04-02T01:15:34.000Z

We printed at the original model size. That being said, it turned out really good, so I’m going to do another one at 125% or maybe even 175% when I order more filament.

Probably going to print it with glow in the dark filament

I’m hoping to have it painted this weekend, if I do, I’ll post another photo:)

Thanks!