Hi guys, thanks for your input! Moving forward, could you please use a link to your hub profile as a means of contact? I took your email out now, but please keep it in mind for next time. Cheers
First of all, the Cubify Sense is far from high definition. It will give you selfies that lack precision in texture and spacial resolution. We have a couple here and we just don’t use them. It is good for non-commercial use.
I would recommend using an Artec 3D scanner. It is much better. We do a lot of color prints with a Projet 660. With the limitations of any color 3D printer, you can’t afford to have a bad source file - it would only make the prints worse.
We are in Canada but perhaps it could still work. After all our canadian dollar is not doing well right now.
1 Like
Lil_3D
March 12, 2015, 1:26pm
16
I’m unsure on the lockdown that I expect there is on the 3d systems version, but ideally based on your statements, you would want to get a structure io and run the aftermarket app itseez3d. While lower quality then an Eva, for the difference in price, it’s more then acceptable. There are several companies out there that will do touchups on the scans for a low cost. Basically you also want to ensure you have the correct setup. It’s best to have a turn table for the person and photo lights on both sides of you to ensure consistent lighting. This set up only cost about $700 but really improves the quality of the scans.
https://www.3dhubs.com/toronto/hubs/lil-3d-printing
2 Likes
Hello, We have a Projet X660 and we commercialize full body 3D Scanner.
We use a 3D Scan Sens Cubify with Recfusion (possible with Reconstructme and Skanect) which is better than the 3D System’s software.
The most important is to have :
- Good lighting light
- Full body 3D scanner (turntable, automatic vertical rail with universal support for 3d scanner)
Have a nice day !!
1 Like
Attached Full body 3d scan with Sens
For printing 3d scanned with a particular texture or color scanning application we found the press by Projet 660 ( http://www.gaiasolution3d.com/prodotti/stampanti-3d/projet-x60/ ) have no terms of comparison is terms of cost and quality.http://www.gaiasolution3d.com/prodotti/scanner-3d/scanner-3d-insight-3/ ) or by a stage of our creation that will be soon on the market .
LAD3
March 14, 2015, 3:48am
20
Wonderful to get well ground feedback from all of you ! Tks. I am assimilating info and will be answering individually to you shortly.
One thing is clear and is that SENSE 3d printer is out of consideration for professional use. While most probably will buy an EVA, am meanwhile
interested in low costs alternatives (Kinect and a couple of etceteras). With your support i may come out with a couple of printing qualities,
high & super high or so…
LAD3
March 16, 2015, 8:33pm
21
Hello Gaa, How soon will you be in the market? Pls keep us posted. Best wishes.
LAD3
March 16, 2015, 8:34pm
22
Gaia,i mean, pardon for typo.
Good evening the theater is already built and we’re finishing the complete automation of the system .gaiasolutionsnc@gmail.com
LAD3
March 17, 2015, 2:00pm
24
Hello KauPang,
I would like you to evaluate a couple of files. See if quality is print worthy (no need to print yet) and give me a quotation for 3 sizes : 9, 12 & 15 cm in full glorious colours.
I will send you first .PLY and then .OBJ. One of the files has good lightning not so much the other.
Is it OK to send you the files? Your quotation would be exworks, no postage required yet.
Tks & rgds
LAD
PSD. And where are you located?
Although Sense 3D and the structure sensor might have pretty much the same precision, the structure sensor is definitely better if you compare both scans. This is because Occipital, the guys behind the strcuture sensor, have released an SDK therefore there are a lot of good apps that are already available for scanning objects, people or even spaces (like room or interiors).
Some of these apps (like itseez 3d ) do a post-processing of the scan that ends up in very good results. Obviously still not comparable to professional scanners but sill good considering the price of the device.
Here you can find some of the scans I have done with the Structure (it was during an event with very bad lighting and I used an older version of the app, now you can also do full body scan and not just busts…):https://sketchfab.com/FrancescoPusterla/folders/817b53f4ad7d4fad8ef7322d204821df
Gaia solution advice to after extensive testing using the ProJect 660 Pro for the construction of minimum , Shapies … we also tested a printing process to make the best joints for info please visit …
Hi guys, just a heads up that I moderated your contact details out. Moving forward, please use your hub profile as a way of contact. Cheers!
Hello LAD;
Sorry for late reply - missed your msg. I am located in Norway. Pls. send files, and you will have a quotation. rgds. Bjorn
Sorry for that,
We’ll keep that in mind! Thanks!
Hey imalize,
Where did you get all the motorized parts in your scanning setup? I’ve been looking for a turntable and scanner rail system. Any info you can provide would be greatly appreciated!
thanks,
mark
Hi mark !!
There is a tutorial for a basic model to build :
I’ve had those projects bookmarked for a while now. I was wondering how you motorized your scanner rig. Got any references for how you did that? Maybe a few close-up photos would help!
Regards,
Mark
