Cubify Printers

[kedongreenidge]

I am located in Aouth America.Thanks Though!

[kedongreenidge]

Thanks for your feedback .I am located in South America

[kedongreenidge]

Thanks @cad ninja !Would you mind emailing me or posting just a couple photos of the quality prints you get?

[Pot8oSH3D]

Oh! My mistake. I do beg our pardon. Guess I must be a bit too sensitive to the latest trend of spammers who post ads in the guise of product recommendations. Let’s face it, 3D seems rampant with BS at the moment. Actually, I am accustomed to being on here but, must say I hadn’t noticed pics mysteriously appearing. I’ll have to keep and eye out for that.

[rvtilburg]

Beste Freek, wij hebben een CubePro Duo en je bent welkom om ervaringen uit te wisselen.

[Brian]

Sorry guys I added that thumbnail since you were specifically mentioning the Cubify range of printers, we’ve noticed that threads with pictures get a lot more engagement, so was just trying to help. I’m happy to remove it though.

[FablabTiel]

Aha, leuk.

Waar moet ik naar toe?

[rvtilburg]

Freek, ons adres is de Ambachten 41, 4881 XZ Zundert. Bij voorkeur een keer op een avond komt mij het beste uit.

[FablabTiel]

OK 's avonds is prima

Vanaf volgende week alle ruimte

Voorkeur voor een dag?

Deze dialoog misschien even off-line

fvankeulen@3dprintedproducts.nl

[Filemon]

Off-topic, please consider this a warning @kevinpingcan

[3DSteve]

As a 3D Systems reseller for Eastern Ontario/Western Quebec, my experience with the Cube and CubePro printers has been positive. We can get these printers within days, and they usually work fine “out of the box” provided that the initial setup is done properly and if the equipment didn’t get bounced too much in shipping. We also sell RoBo and MakerBot, comparatively all three brands/models seem to work relatively well. My guess as to why very few Hubs list Cube and CubePro equipment is because most Hub operators tend to get equipment that is easier to modify and/or upgrade. A RoBo can easily be enhanced by upgrading the electronics, the hot end, etc. Can’t do that with a Cube or CubePro. Material availablility may be another reason. More brands and types of materials available for RoBo and other open-source devices than for the Cube and CubePro.

[octopuslab]

I own a Cubepro and even though it’s a beautiful and well built machine it is crippled by a poor slicer that makes you waste it’s overpriced material. I love my printer but hate the fact that software and cartridges are designed to excesively waste a filament that costs 4 times the price for less than a 1kg (I had to open up a cartridge and weight it of course, not that 3dsystems is any clear about this info) and that this ridiculous pricing is a consequence of all the control methods they use and not the result of an outstanding quality and performance. I would be willing to pay the price for a good product but I deeply regret being engaged in this vicious cycle. There are companies out there with a wider variety of colors and textures, at a reasonable price who don’t confuse customer’s loyalty with forceful dependency. This is not cool.

[kvones]

I feel strongly that the community should be boycotting companies who introduce proprietary filament systems. Here in the UK the Cube filament is twice the price of others. Think what happened with inkjets! Just a thought…

[Tomas_4]

We had develooped lots of accsesorys for BFB machines in the past we still have extruders, heated beds, metal replacements, etc!

I’m in Argentina if you are intrested contact me via infoche3D@gmail.com !!

Good prints!

[MakerTree3D]

Besides the expensive price tag of the Cube printers (I own a CubePro Duo) and was curious if anyone else out there has also had new cartridges with unreadable/ unrecognizable chips in them? I’ve only had this happen with 2 of the 3 black PLA cartridges I’ve bought. No matter how sure I am that the new cartridge is positively seated to the reader, I continue seeing the “Not installed” status for the bay these cartridges are in. I’ve tried loading them in the secondary bay with the same results. All of my other new and used cartridges all are recognized and read properly, except for these brand new black PLA cartridges.

I’ve got RMA numbers for returning them, however I was wondering if anyone else here has had this experience, and possibly even found a way to remedy it….

[octopuslab]

I own a trio and so far I haven’t had any problems with the cartridges except that they are overpriced. I have talked to many people that are trying to hack their printers either because they want to use bulk filament (like myself) or because their chips are not readable and don’t want to wait another several weeks to get new ones. From what I know, they end up returning them…

[Stephan_17]

I own a CubePro Duo and:

- I did experience unreadable cartridges (forgot if it was ABS or PLA). It got replaced, no question asked.

- I had HW failure after a firmware update. Here too it got replaced, no question asked.

I will echo a lot of pros and cons already stated on this forum:

Cons:

- Proprietary and expensive Cartridges, close to a scam ($99/cartridges - between 3 and 4 times more expensive than it should be)

- Still experiencing warp on ABS in spite of heated enclosure (one of the reason I bought it in the first place)

- Poor slicer functionality (can’t manage supports yourself: either all in or none)

- Nylon still not available, although part of the sales pitch for buying the machine

Pros:

- Elegant design

- Heavy and solid machine with quality components

- No extruder issues after 6 months of use, can’t say the same for few friends owning Replicators

- Relatively non-noisy (subjective comment)

- As per above, excellent customer service which dealt promptly with my issues and kept me in the loop

Agree with earlier comments - the scanner (sense) is beta version level. Almost impossible to complete an acceptable scan so far.

[3FormUK]

We are Cubify resellers, and to keep in with our philosophy of knowing what we sell, I have been using a Cube Pro Duo for a while and have just got a Cube 3.

Having scanned the previous responders, I agree that the Cube products are exceptional quality, but the consumables are hideously priced.

The Cube 3 is a lovely machine, and loading the filament is indeed pretty simple. The extruder tip is part of the filament spool and locates easily into the head where a light shines to show you which hole to put it in. I did notice that one extruder sat about 1mm above the other. When I removed the filament, I found you could simply extend the tip a bit and pop it back in. User interventions were presumably intended to be a thing of the past, but as ever, this is not the case.

On firing it up, the test print failed to stick to the bed. The cube glue does not seem to work well in a cool environment, so I used the glue stick from a DeeGreen and it worked fine.

The user interface is typically 3D Systems in that it is very restrictive. I now have 3 versions of 3D systems slicers, one for the Cube 3 (pretty pants), one for the Pro (moderately pants) and one for the ProJet 4500 (rather good).

I visited Leapfrog in The Netherlands last week. They think that cartridge filament systems are set to become the norm. What a shame if that is the case.

[3FormUK]

I am surprised that using a Sense didn’t put you off Cubify products immediately!

Speed of the Cube 3 is still an issue especially when printing in two colours. It seems to only heat one extruder at a time so swapping between colours takes some considerable time, similar to Cube Pro. The stock print of a two colour number which is about 80mm in Z height has been running over night as it is a 9 hour print. I will attempt to tag the result onto a post later.

[3FormUK]

The test print is pretty nice. It took about 9 hours to print with a 40mm Z height but the quality of the print is really good. The layers are virtually invisible and there were no visible flaws in the print. I am rather impressed.