Hey all, I’m back (to the future) again with some new prints.
Pac-Man (1980)
Printed on the BEETHEFIRST.
15% infill - High quality
Used more filament than I thought it would so halfway I had to change the filaments, but imo it gives a cool look to it. Printed with support with Pac-Man’s ‘mouth’ upwards.
Download the file on thingiverse and show me yours!
Back To The Future (1985)
Delorean
Also printed on the BEETHEFIRST.
30% infill - High Quality
Filament: Telegrey
Download the file on cults3d.
Hooverboard
Printed on Form 1+
High Quality
We’ve had some issues with the Form 1+ lately but it’s finally working again, although I guess there were really tiny bits of dirt in the resin thus the details could be better. Nevertheless a really fun and quick print to make.
Download the file from Grabcad.
The only thing I would have really liked to print are the Nike Air Mags from Back To The Future with the powerlaces (which Nike will be releasing Spring 2016 woohoo). Unfortunately I couldn’t find this on the internet so I might design this myself for an upcoming project.
Macintosh Classic (1990)
Since I’m waiting for the new AppleTV, I thought it would be nice to give this model a try.
This was printed on the DeeGreen.
Material: MonoPET
Quality: High
Infill: 100% (although less infill is needed actually)
This is one of those prints that are easy to print and with two tiny stickers it brings the whole print to another level!
Download from thingiverse.
And just in time for halloween: Magic Faucet
Also printed on the DeeGreen.
Filament: White (1.75mm)
Keep in mind when printing this; put the speed a bit lower or make sure the small parts (handles of the faucet) are sticking to the bed and are being printed too, which was not the case with my model unfortunately.
Downloaded from cults3d.
Leave a comment if you have any questions.
Oh, one more thing…
Upvote my post 
