1

Hey guys! So far i love my new 20 40 turbo (white), but I just need some help with a few things.

1. When I open CURA, during the setup it asks me what type of printer I’m using, but there is no option to select delta wasp 20 40 turbo. Do I need a newer version of the program?

2. I printed the test print of the empire state building and everything printed but the antenna. I also noticed that the supports in the center are thin and not always complete. A friend recommended that I purchase a feeler gauge from my local auto parts store to level the bed more precisely. Also, that I should change the print setting from turbo to regular speed. How do I change that setting?

thanks for any help :slight_smile:

1 Like
2

Hi,

I suggest to you to use Cura_15.04.6. Then you select other printer and after download the right profile by a gcode (e.g. empire.gcode) by clicking on file->load profile from gcode. The only thing you have to do after is to go il advanced printer option to set round plate instead sqaure plate and check heated bed combo box

1 Like
3

Hi Bailey,

I just wrote a tutorial on this subject. you can download it from: http://www.cosmo3d.it/downloads.html.

Please let me know if you find it useful, and if i wrote sonething wrong.

Happy printing from Comso3D

4

s