3D create and print (eagle moss)

Graham_Tanfield · 2016-10-13T11:09:22.000Z

Still having trouble with the printer and software,the damn thing still vibrates as the printer head tries to go further to the left than its supposed to and the software still doesn’t tall to the printer so nothing prints.I have emailed both the tech guys and Eaglemoss with very little in the way of a solution and I also tried calling both the v3 customer services and technical help and was on hold for 10 minutes on each so I gave up. A refund is what I want now as it’s turned what I thought would be a good project and product into a large paperweight.Rant over

anon36107456 · 2016-10-13T11:13:33.000Z

[post deleted per user request]

Danny_Hardy · 2016-10-13T12:18:36.000Z

Graham, the problem with the damn thing still vibrates as the printer head tries to go further to the left than its supposed to is a problem with the limit switch not being being pressed in fully, I put my fix below. You need to make sure it fully clicks as the print nozzle arm inside the metal case pushes the limit switch down.

If it is fully clicking and being hit every time and not being pushed back away then you will have a problem with the limit switch but either way thats what the limit switch is for and that is the reason, it is there to say " this is the end, stop moving in this direction "

Kevin_West · 2016-10-14T02:09:04.000Z

Hi All

I know that some of us are having issues with this printer, however if you do manage to get it to work here are some tips.

Firstly forget the slicing system in the printers software just use it as a way to connect to your printer, send the g_codes.

download

Meshmixer at www.meshmixer.com

Slic3r at http://slic3r.org

Meshlab at http://meshlab.sourceforge.net

Now I use Meshmixer to add the support structure to the Model, Slic3r to generate the g_code then upload with 3d create and print.

now Meshlab I use to convert the sketchup file to stl as sometimes the sketchup plugin fails.

Here are the settings for PLA in Slic3r I use which seem to work.

In Print Settings

Layers & Perimeters

Layer Height 0.2

First layer Height 0.2

Perimeter 3

Solid layers top and bottom 3

Seam position random

Infill

Fill density between 25% and 80% depending how strong you want the Model

Fill Pattern Honeycomb

Top & Bottom Fill pattern Rectilinear

Combine every fill layer 1

Only when needed tick

Solid infill layer 3

Fill angle 45 degrees

Solid infill threshold 70 mm2

Infill before perimeter tick

Skirt And Brim

Loops 4

Distance from object 4

Skirt height 1

Minimum Extrusion length 0

Brim width 0

Support Material

Make sure it is not ticked as you will get better results from Meshmix do look on youtube for tutorials.

Speed

Perimeters 30

Small Perimeters 20

External Perimeters 15

Infill 50

Solid Infill 50

Top Solid Infill 50

Support Material 50

Support Material Interface 60

Bridges 60

Gap Fill 20

Travel 80

First Layer Speed 30

The rest of the settings make sure they are set to 0 except Max Print Speed set to 80

Multiple Extruders

Make sure the settings are set to 1 and the tick boxes are empty

Advanced

Make sure all settings are set to 0 except these settings

First Layer 200%

Infill Perimeter Overlap 20%

Bridge Flow Ratio 1

Threads 2

That’s all the setting for this section

Filament Settings

You need to set that according to the material you are using and the recommended settings**.**

Printer Settings

General

Bed Shape Rectangular

Size 140 X 140

Origin 0 0

Extruders 1

G-Code Flavor RepRap

Pressure Advance 0

Vibration Limit 0

Custom G Codes leave alone

Extruder 1

Nozzel Diameter 0.4

Extruder Offset 0 & 0

Length 1.5

Lift Z 0.5

Speed 20

Extra Length On Restart 0

Minimum travel after retraction 1.5

The two boxes not ticked

Length 10

Extra length on restart 0

This should set you up for printing

When you do load the G-code the printer will tell you the bed is heating , But it will not mention the print head. Just let it run.

Now as for the Printer

That square PCB build plate get shot of it as it is useless.

Get hold of some sheet Aluminum the same size as the PCB. Rough the surface with some 80 grit emery paper.

When you get ready to to print spray the Aluminum with cheap Hair Spray, this will help combat warping.

I have added a Photo of the results.

Do search for tutorials on the software packages I have mentioned, but ultimately get a better printer for half the price we had to pay for this thing.

Kevin_West · 2016-10-14T02:17:13.000Z

And guess what you can print with it ad the printer works to build cases to cover the electronics.

No sarcasm intended I done the same within two days of firing this v3 up

Kevin_West · 2016-10-14T08:54:15.000Z

I have not been able to connect with the printer using repetier.

anon36107456 · 2016-10-14T09:38:06.000Z

[post deleted per user request]

Kevin_West · 2016-10-14T13:00:10.000Z

Yes please

Kevin_West · 2016-10-14T13:02:56.000Z

Do any of you guys think the bed mount points need to be stronger ?

anon36107456 · 2016-10-14T18:18:57.000Z

[post deleted per user request]

Kevin_West · 2016-10-14T20:30:07.000Z

Thankyou

Will be glad to move away from the V3 Just rebuilding my Prusa I3 onto a 3mm Steel Frame.

Then I will Probably donate this V3 to My child’s School where Precision is not an issue.

Kevin_West · 2016-10-16T00:20:10.000Z

I’m ever the optimist…

I had one great print from this printer two days ago, and I thought I had cracked it.

Mmmm not the case how wrong could I have been as the next few prints started to degrade, and I thought it was my settings.

Tonight I started a print to discover the bed was not positioning to where I had calibrated it so I went through the process again, and found it was significantly off.

After closer inspection of the z axis I found that it alters its position, and this is due to the flimsy construction. I should not be able to move the axis by hand by 10mm. No wonder every photo of prints show visible ghosting.

I do not know what the answer is for this one I think I shall have to either gut it for parts or use it as a door stop, but I cannot risk the print quality

anon36107456 · 2016-10-16T18:01:06.000Z

[post deleted per user request]

Peter_Over · 2016-10-17T10:16:12.000Z

I must be one of the lucky ones my printer is working fine even the software from Eaglemoss is working OK the only problem I have is the bed will not heat but with the use of masking tape and Ridge Ink PLA sticks to the bed well.

I did fine the calibration was hard and took some time but the bed has not moved and is still working after a number of prints.I also had a problem with the extra fan as the vent part did catch on the bed plate when first fitted but a small amount of bending the holding brackets solved this.

I did find that if I printed a large circle 125 dia and 1mm deep helped with the calibration as it was better to seen any errors.

Stephen_Kirby · 2016-10-20T17:05:06.000Z

I’m still emailing the technical staff about the problem with the extra fan and nozzle from issue 91. I too found it fouled the clip on the build plate and could catch. Also it was over cooling the print head so it never quite reached temperature. I’ve butchered the nozzle by cutting about 3mm from the nose, and altering the cut outs for the screws so that it sits flatter to the assembly. Lastly I have taped over 50% of the nozzle to restrict the cooling effect. None of that should be necessary though, and the latest emails suggest reversing the “silver brackets” and that there is a mismatch between the software temperature setting and the heater. They suggested turning up the software setting but that is odd as if the head doesn’t reach whatever is set then the printer won’t commence. My first print was a disaster and I had to clear a blocked print nozzle. The calibration setting is a real headache. I can’t understand how the V3 can have been around for this long yet there aren’t proper solutions. Oh, and the Mac software won’t open, it just crashes. Good job I have Windows too. Stephen

anon36107456 · 2016-10-22T07:35:40.000Z

[post deleted per user request]

anon36107456 · 2016-10-22T15:36:18.000Z

[post deleted per user request]

Kevin_West · 2016-10-23T13:06:52.000Z

They will help, however I would also go into manual mode and check that all axis move smoothly. I have found that my z axix is all over the place, and on closer inspection the weight of the x axis is causing the z axis to twist.

Adesaxo31 · 2016-11-08T19:41:08.000Z

Has anyone got an update on what’s happening with the software on Windows 10 iv emailed them multiple times and just get an automated response thanks in advance

Adesaxo31 · 2016-11-08T19:45:30.000Z

Has anyone got an update on what’s happening with the software on Windows 10 iv emailed them multiple times and just get an automated response thanks in advance