Skip to main content
10 results for@elmuchacho #3d-printers
Advanced filters
Relevance
Relevance
Sep '15
-
Based on you description this is most likely coming from the stepper motor driver. On the stepper motor driver there is a little screw like thingy turn...
Feb '16
-
Right click on the object select center on the platform. https://ultimaker.com/en/manuals/16518-mouse-control Anyway I will recommend you to read the m...
Feb '16
-
In short if you bring 24v to the MightyBoard it won't be damaged. The damage might occur on the PSU as it might be pushing the limit of the amount of a...
Jan '15
-
The printing time difference is due to the cooling settings in Slicr3 within the Filament Settings tab there is a cooling threshold by default this val...
Sep '15
-
I've heard some good things about the Flashforge but ultimately this is Makerbot architecture clone. IMHO I will not buy it especially if you have a £1...
Oct '15
-
To answer to your question yes you can print directly onto the alu build plate but I will not recommend you to do so for the simple reason that if your...
Sep '15
-
Which version of Cura you are using?
Sep '15
-
Did this start to happen after you flashed Sailfish? If that is the case you might double check that you've restored the correct offset http://www.sail...
Aug '15
-
Hi Zak, I got the Duplicator 4 too and it is well known to ooze when dual printing. My best advice is to reduce the temp as much as you can and increas...
Dec '14
-
IMHO If you require a machine to print accurate dimension, delta like the Kossel are the most challenging to calibrate. The smallest error in tower twi...