Skip to main content
12 results for@broncosis #3d-printing
Advanced filters
Relevance
Relevance
Dec '16
-
I have had this same issue I would look for a set of z axis wobble isolators on thingiverse They completely solved this for me What's probably happenin...
Mar '17
-
How tall I can do it in pla Just designed a fan duct for a rc hover craft that is 180mm in diameter Send me a message we can talk more
Jan '17
-
I have seen some i3 designs with one lead screw for x and one for y
Dec '16
-
A ramps setup with lcd can be had pretty cheep I have a great x carriage with bed leveling and I can recommend a couple of great extruders to run the e...
Dec '16
-
First off the kit looks pretty decent from the pic I don't recognize the board but with a bit of work most boards are compatible at least the basic stu...
Oct '16
-
What control board are you using it sounds like you may not have put power to both 12v locations on your ramps board
Oct '16
-
I had to chop up the code a fair bit to get it to run with auto leveling and a LCD If you want I can pack up my firmware folder and share it or maybe I...
Oct '16
-
I would check your current setting then maybe the drive is set just a bit low the x would also need more current which would make this problem more evi...
Jun '15
-
Check your belts
Feb '16
-
Yes this is a good idea 1.75 made a huge difference for me If you go dual you might not get the extra speed as you moving extra mass around But with a...
Apr '15
-
Where are there is often local user groups that can help if your in BC 3d604 is a good option I could possiblely help if your not to far
Jul '15
-
Sounds like you have a jam maybe something got in your hot end or if it has a PTFE liner it may have swelled