Skip to main content
9 results for@broncosis #3d-printers
Advanced filters
Relevance
Relevance
Dec '16
-
I have had this same issue I would look for a set of z axis wobble isolators on thingiverse They completely solved this for me What's probably happenin...
Jan '17
-
I have seen some i3 designs with one lead screw for x and one for y
Dec '16
-
A ramps setup with lcd can be had pretty cheep I have a great x carriage with bed leveling and I can recommend a couple of great extruders to run the e...
Dec '16
-
First off the kit looks pretty decent from the pic I don't recognize the board but with a bit of work most boards are compatible at least the basic stu...
Oct '16
-
What control board are you using it sounds like you may not have put power to both 12v locations on your ramps board
Oct '16
-
I had to chop up the code a fair bit to get it to run with auto leveling and a LCD If you want I can pack up my firmware folder and share it or maybe I...
Oct '16
-
I would check your current setting then maybe the drive is set just a bit low the x would also need more current which would make this problem more evi...
Jun '15
-
Check your belts
Apr '15
-
Where are there is often local user groups that can help if your in BC 3d604 is a good option I could possiblely help if your not to far