I own a Zortrax and what your talking about is Firmware that runs the machine, always get the latest version of software and firmware, that way your kept up to date.
As far as the Zortrax Machine goes, I cannot fault it, I have had it running for a year now and no trouble at all, compare a Zortrax to an Ultimaker, I would not put them in the same bucket, Zortrax to me is superior, Industrial grade Prints that I cannot fault.
I have several machines from different makers and about 6 of my own built, Zortrax stands above all, I would have no hesitation in buying a Zortrax over any brand.
Other Filaments can be run in a Zortrax, but you need an add on from :
I thought at some point they had wifi in version x. I know they also improved the platform between certain versions. I have the latest version 4. It’s the best printer I had by far. I had a RepRap and Form 1+. The Zortrax has been printing for over 20 hours now without a single problem.
Hey, congrats on the printer, your going to love it.
As for Z-temp I’ll say this. I own two M200’s, one has the Z-temp. I’ve had the printers for over a year and I waited till my first ones warranty ran out. My main reason for the year though was just to get experience and learn the machine. I’m not sure if this is your first 3D printer but if it is I would certainly wait a little before worrying about Z-Temp.
It seems like a great tool but really you will be able to print anything you need really with the regular machine. Only thing I wish I had was the option for ninja fled but z temp can’t even do that.
Ill ll also add I’ve not had very good luck with the z temp. I’ve only tried using it a few times and the material I’ve tried isn’t very highly recommended so it’s not a great example. I’ve spent probably more time taking the hot end off and cleaning it then I have printing.
Your suggestion to gain some familiarity with the printer before venturing into third-party materials is a sound one that I agree with.
As for “being able to print anything you need” without a Z-Temp, I would respectfully disagree - you cannot print any of the myriad and wonderful PLA, nylon, or tree-lignin based materials out there. Warping is an issue with all of the Zortrax materials, and pretty much a non-issue with the others. I’d owned my first M200 for a year before developing Z-Temp (yes, I’m the developer) and printed a boatload of ABS and UltraT with it - now I almost never use it because PLA prints so beautifully warp-free.
As you note, not all PLAs work well, but more and more compatible ones are appearing on the market all the time. There’s a complete guide to what works and what doesn’t at http://www.z-temp.co/materials-guide.html 4.
Regarding nozzle clogs, it’s simply a matter of being sure to run a few feet of material through the nozzle at full temperature whenever changing to a lower-temp material. I haven’t had a clog in many months.
As to Z-Temp “not even being able” to support NinjaFlex, that’s nothing to do with Z-Temp - the design of the M200’s feed system, with the feed gear several long inches from the nozzle, precludes its working with rubber-like materials. You can’t push a wet noodle! Taulman PCTPE, however, works great and while not really rubber-like, can provide flex for many applications.
I have to disagree to an extent on your results. Have you printed with the v2 nozzle and plate? I am able to get full build size prints with zero warping. (ABS and UltraT)
Also a little bit of slurry does help with that. I will get a few warped parts but that usually due to the middle being .02 off from the rest of the build platform. This means that the build plate needs taken apart and cleaned then back to printing.
I can confirm that the Zortrax M200 has an enormously high print quality and we printed even defect-free parts which the printout lasted over two days.
We can be excited about what brings the new Zortrax Inventure 2 with its monitored material consumption!
