Skip to main content
We are sales and support Zmorph for Zmorph in the UK, and FabLab Essex have several ( so you can try before you buy if you are a Fablab member) . As with all 3D printers you have to get to know them (and their software) to appreciate their advantages and idiosyncrasies. The interchangeable heads are a great advantage when changing materials on a regular basis. The milling and laser capacities are fairly limited - don’t expect them to do the same as dedicated machines. The ‘soft material’ extruders are very material dependent but with the right materials some people have achieved some remarkable results.
Mousetrap Innovation Ltd
3 months later
Hey @shashipalsadana, those are really great results! Would you like to share some of your printing experience in our ZMorph community: what type of materials have you tried, print settings that worked best aso? Let me know how this sounds. Cheers
sorry for the late responce you can see the marvin from zmorph in the pictures of our hub, also in the question of the other heads we have use them all of them
laser is 4w so dont expect to cut wood ( need a lot of passes for that) , engraving is easy
check in our facebook page for videos of the laser and dremmel head
can post here your settings ? what kind of material ?
A tip that actually no one tell you , fillament quality is always crucial in fdm printers , actually we minimize almost to 0 the problems in printing by use only hi quality fillaments i suggest you Colourfabb ,Formfutura , proto-pasta ( we have use them and the 3 of them with great results )
5 months later
Hi! We are dealers of Zmorph in Ukraine. We can answer the questions that we have understood. We have all toolhead of Zmorph.