Y axis move only one direction

[usawinters]

Hi guys, i bought a new FT-5 printer, assembled it, but Y axis moves only one direction. Please advice what could be wrong here … Thanks, Dmitry

[usawinters]

Ignore … It is appeared that i had a faulty stepper for the y axis.

[JackDavies1]

Hi Dmitry,

Without any more info it is hard to say, however something to look at is the endstop config. Make sure the endstop direction is set properly, if it is set to the wrong direction the motor will only move one direction as a safety feature.

Best,

Jack - 3D Hubs