Which 3D Scanner do you want me to Review?

3dPrinted4u · 2016-06-22T16:53:22.000Z

David Structure Light Sensor Scanner (SLS Scanner). I would like to see if you think it is worth the investment.

Jory · 2016-06-22T17:02:13.000Z

In your reviews, would you mind also explaining how easy to use the software is (or isn’t), how fast it processes scans, ease of merging multiple scans, any kind of prep work you have to do (applying reflectors/powder/etc.)? I think a lot of the end-result depends on the software being used.

The new Artec Studio 11 software seems pretty awesome and easy to use. Creaform’s isn’t bad either. Both scanners are far from cheap though.

JF43FR · 2016-06-23T07:48:04.000Z

I would like a review on the Bq Ciclop 3D scanner. It is a very affordable scanner for small budget customers.

Jory · 2016-06-23T14:35:21.000Z

If you can, see if you can get your hands on the VERY budget minded DaVinci XYZprinting Handheld scanner. I’m curious what kind of quality a scanner under $200 (USD) can give.

http://us.xyzprinting.com/us_en/Product/3D-Scanner

NickLievendag · 2016-06-23T18:25:21.000Z

I try to write as much about the software as possible.

I’m going to test the Artec EVA with Studio 11 within a few months. But for that price you may expect the software to be good

NickLievendag · 2016-06-23T18:26:52.000Z

Didn’t know that one. Only seems to be available in France?

However I do want to test scanners that can also capture color, not just geometry, because I’m writing for an audience thats broader than FDM 3D Printing.

NickLievendag · 2016-06-23T18:28:46.000Z

I’ve requested one to review, but no answer yet. It’s basically an Intel RealSense, so I’m curious to what software they include to make the scanning process as friendly as the price.

NickLievendag · 2016-06-23T18:30:03.000Z

I’ve requested a review model of the SLS-3 with TT-1 Turntable. No reply yet, hopefully soon. Pity it can’t capture color.

NickLievendag · 2016-06-23T18:31:25.000Z

The best way to know what I’m currently testing is to Follow me on Instagram, by the way.

RedApple3D · 2016-06-23T18:55:19.000Z

I have the Artec EVA and as11 is great especially with the autopilot. Scanning large textured areas can be tricky but after a while you get used to it and know what to do. I have focused on large objects like full cars but you need to know what ypu are doing as files can run upto 26gb to process. Every scanner has its limitations. A good review would be the Artec spider and the einscan pro…I am looking for a handheld scanner that can scan with an accuracy of o.o5mm. The einscan pro is around 60 000rands and the spider around 300 000 rands… Would really appreciate a comparison between these two. I have tried using the autodesk memento but did not receive good results at all on a part I was trying to have scanned. The reviews on memento are brilliant but I don’t belive the program is designed to scan engineering components. Another area to look into is photogrammetry. It’s alot work but would not cost that much…

iperpaolo · 2016-06-23T23:10:23.000Z

einscan-pro, it’s a very interesting product, could be interesting also to check “scan in a box”

NickLievendag · 2016-06-27T07:52:07.000Z

I’ll receive an Einscan Pro within a few weeks! I’ll take a look at the Scan in a Box this week at the Additive Manufacturing Europe trade show.

EyemergE · 2016-06-27T08:28:54.000Z

Excellent! I can’t wait to see the results, especially from the software: ease of cleaning / stitching etc. The scanresults themselves I already saw some examples which look good (for professional purposes). Of course it is, as often, as well a question of price/performance ratio.

NickLievendag · 2016-07-01T07:56:39.000Z

Checked out the Scan in a Box yesterday, check this Instagram photo.

It uses visible structured light, which gives very detailed geometry, but the monochrome cameras use the same technique to capture color as the Einscan-S does, which I find subpar.

I’m prioritizing hand hand scanners with RGB camera first, so maybe I’ll test that one later.

EyemergE · 2016-07-08T10:30:07.000Z

If you have the Einscan Pro available: I may have a good test situation for you. Send me a direct mail if you’re interested.

stevens · 2016-07-08T13:57:09.000Z

Hi Nick – I’ve used Creaform’s GoScan in the past. It’s a decent enough scanner for human body parts, but for that price I always thought they could do better. I’d be curious to know more about Thor3D. There is not much info out there about it, but I think a wireless scanner has been long overdue. I wonder how long the battery lasts.

3DVS · 2016-07-14T13:17:29.000Z

Very portable color scanner : Matter and Form - 3D Scanning Hardware & Software

But even from their own website the results doesn’t seem very good, but for the price…

NickLievendag · 2016-07-14T14:32:38.000Z

I’m curious to that one, too. Unfortunately Matter and Form isn’t very responsive to my requests.

NickLievendag · 2016-07-14T14:34:53.000Z

I’m in great contact with Thor 3D and their scanner is on my schedule for the coming months. I like the fact that it’s wireless and am very curious to how it competes with an Artec EVA and Creaform GoScan, which seem to be it’s main competitors that dominate the higher-segment market of 3D Scanning.

To be continued…

NickLievendag · 2016-07-14T14:35:46.000Z

Thanks for the offer, but I’ve already arranged one with the complete Color Capture modele & Industrial Pack (Turntable)