Its a model for an exhibition so a relatively high standard would be preferred. It depends what you mean by a high standard?
Skip to main content
Ok, well the thing is because my printer extrudes plastic it often struggles with overhangs as do all fdm printers. Therefore I would need to put in lots of support material for it to build onto, this is often hard to get rid of and can leave a rough surface. Anyway Ill see how this goes and get back to you.
Ah okay ! thank you!
Hi I’ve tried the print and unfortunately bad news. As feared the poles have lots of droop on them and are very week as they aren’t thick enough. Also some of the poles weren’t able to print as the overhang was too great with out support. I would recommend trying a resin printer. But if you must have it fdm printed you will need to make the poles thicker by at least 2-3mm I would think and add support in cad on pretty much all the overhangs. I will attach a picture of the failed print.
