The Micro 3D Printer - M3D

MarkWheadon · 2015-05-13T13:18:24.000Z

Hi Hans – I’m not in the Netherlands (I’m in the UK), but I’ve owned an M3D Micro for a couple of months now if you have anything specific you’d like answering?

mmcnama4 · 2015-05-13T13:21:35.000Z

Also not in the Netherlands (US), but happy to answer questions as well.

EDISON · 2015-05-13T13:34:06.000Z

Yes, I am also curious about the capabilities of the Iris.

Hans_Wolf · 2015-05-13T14:49:01.000Z

Delivery takes so long
Maybe someone in the Netherlands has already the printer

I have already created a site on Google+ where you can share information about this printer
https://plus.google.com/u/0/communities/117497416756777705257

You’re welcome

gabriela3d · 2015-05-14T10:36:06.000Z

Hey @ @voscoleccion how’s your experience so far with MIcro3D? We noticed an increase in new M3D Hubs owners and would love to see more of you guys showing off your prints! Cheers

gabriela3d · 2015-05-14T10:37:15.000Z

Thanks for sharing! Hope you’ll share some of the best practices with our M3D community on Talk Cheers

MarkWheadon · 2015-05-14T11:16:54.000Z

@gabriela3d Here’s a fun print M3D Micro – Stripy Duck With Home-Spliced Filament - YouTube

MarkWheadon · 2015-05-14T12:19:49.000Z

I’m enjoying the experience so far. My Micro’s been printing pretty much every day for the last couple of months with almost all of the print failures being down to me rather than it. It’s a small, neat, smart looking, quiet 3D printer that requires very little fettling (as M3D start to perfect the self-calibration).

MarkWheadon · 2015-05-14T12:22:35.000Z

There’s a whole host of M3D Micro videos (a how-to on unblocking the nozzle plus a number of time-lapses etc.) on my YouTube channel.

Arnoldas · 2015-05-14T22:04:06.000Z

Haha! That’s perfect!

gabriela3d · 2015-05-15T07:51:57.000Z

Nice

compwizard7 · 2015-05-18T21:12:17.000Z

Yeah, it is a great little printer. The beta software is being updated about once a month, and just keeps getting better. I have been printing with mine everyday for the last month or longer, I even just took it on an 8 hour road trip, plugged it in and started printing with it, didn’t even need to calibrate.

compwizard7 · 2015-05-18T21:17:29.000Z

I am currently trying to print this, I’ll post the results when it is done.

http://www.thingiverse.com/thing:359618

Arnoldas · 2015-05-19T06:51:37.000Z

Any of you guys printed a Marvin on it? I’d love to try this machine!

compwizard7 · 2015-05-19T10:14:34.000Z

I have, it is on my page.

Hans_Wolf · 2015-05-19T10:23:04.000Z

compwizard7 What is your link to the page?

compwizard7 · 2015-05-19T10:26:28.000Z

https://www.3dhubs.com/oklahoma-city/hubs/chase-wichert

compwizard7 · 2015-05-19T10:27:27.000Z

We just got a software update that might make it look even better, I’ll have to make a new one and see

Wilco · 2015-06-18T18:23:06.000Z

Best wel aardig detail te krijgen hoor met de M3D!

En dit zijn best wel leuke raketjes Magnetic Bomb Darts by abutai - Thingiverse

Zitten er zeker al 5 op de koelkast of er achter

20150618_201535.jpg5312×2988 3.25 MB

3DPinte · 2015-10-15T21:16:37.000Z

Hallo

3DPrinthings webshop (www.3dprinthings.be) is een van de weinige Europese webshops die The Micro, M3D filament en toebehoren (nozzle, buildtak sheet…) verdelen. De keuze voor deze printer is gebaseerd op eigen goede ervaringen na de Kickstarter campagne.
Op onze Facebookpagina staat een ruime selectie van de prints die we maakten met The Micro:

Gebruikte filamenten zijn M3D PLA en Octofiber PLA, welke we ook in ons assortiment hebben.
We zijn van plan via onze nieuwsbrief regelmatig tips te geven over prints die je met The Micro kunt maken, dus indien interesse, kun je je inschrijven op onze nieuwsbrief.

Frederik

Marvin_Micro_lowres.jpg467×693 210 KB