Hi everyone,
I am fairly new to the 3D hubs community and I just had a quick question. I have been trying to set up my new printrbot metal which I assembled from the kit. However, I have had some trouble with getting it to work properly. Does the hub provide any support for 3D-printer set-up? I can bring the printer to any body who can help to get some advice.
Thank you!
Hi there! I guess your best options are to contact local hubs and ask if they would help you, or you post pictures and a description of your problems in the talk section. I’m sure, that we could help you this way too. -Marius
Thanks Marius :). I’ll contact local hubs first then.
Where are there is often local user groups that can help if your in BC 3d604 is a good option I could possiblely help if your not to far
Look for local clubs and hacker/maker spaces, as they tend to be the best places to get help with this sort of thing. Also, the forum for the printer model you purchased is usually the best place to start online, as other people who own your printer will most likely have encountered any problems you will face before, and posted solutions.
Thank you everyone. I contacted a local hub and will get help today.
Go on http://www.printrbottalk.com/ 1 or email printrbot’s support staff. Both official printrbot supported/monitored areas. You’ll get feedbac very fast I’m guessing.
Did you get your Printrbot set up and running?
