Go to homepage
71 / 180
Mar 2016

So up votes still matter and count. Gotcha, good to know.

I guess I will participate with my favourite Star Wars character, the Low Poly Darth Vader! There are two versions, with and without cape (Edna Mode would be proud of me!). It was designed so anyone with a 3D printer (or a 3D Hub near) could have one. It only has 3D printed parts, it takes only 2 hours to print it and it doesn’t need any post-processing.

For me, innovation means easier, not more complex, specially when we are talking about a limited technology such as 3D printing. Following the less is more idea, I’ve used a faceted style to simplify the printing process, creating this Star Wars souvenir. It was designed specially for kids, as printing and assembling the model doesn’t require any extra skills, tools or time. Just print it and enjoy it.

You can download it on the following YouMagine link:

https://www.youmagine.com/designs/low-poly-darth-vader

(Don’t forget to check my YouMagine profile, you will find more Star Wars models and other low-poly designs, all of them as easy to print as the one you can see here)
darthvader_lowpoly_body.STL (107 KB)
darthvader_lowpoly_bodycape.STL (122 KB)
darthvader_lowpoly_connector.STL (2.62 KB)
darthvader_lowpoly_head.STL (31.7 KB)
lowpoly_starwars_17.jpg

Great news! This is a lot more fair. Hope to see brand new designs! March 21 is still the deadline and a winner is chosen on the 21st as well? Hopefully the jury doesn’t weigh too heavily on votes then for the sake of the late entries. Also you might want to state a specific cut off time on the 21st.