i have 4 different nozzles for my printer and setting it up in my hub is a nightmare…
for each nozzle i have a max layer height can do (nozzle dia - 20%) so a range of heights would make it more eazy as i can just enter a range… the preset choices on the list does not match up with standard nozzle diameter and the -20% rule of thumb
I agree about the preset choices not being right sometimes. E.g. for bamboofill and corkfill, I offer 0.25mm (medium) and 0.38mm (coarse) layer heights, but I have to put them in as 250 and 400 micron, as there’s no 380 micron option. Being able to add a range or custom values would be great for me too.
This is something that we are discussing internally as well here - a free number field for layer heights certainly would be a good way to improve this.
Thanks for flagging it and we will add it to the development schedule.
What I did was to just choose the closest value I could which was not below the real value. E.g. for my 380 micron layer height, I entered 400 (but would not have entered 350). I figure nobody would complain that the finish is a tiny bit better than it should be based on the numbers. That way, you can have your hub up and running in the meantime. And when the site gets tweaked to allow custom layer heights, I’ll just update to match reality.
I see @petervl already answered this. It’s known indeed. I know it’s a real pain (run my own Hub as well of course). We’ll get back to it. Over and out
