Skip to main content
Looks great! Maybe you could make a fan setup to better cool your prints so you get less overhangs. Everything else is perfect! What’s the layer height? Bed temp?
Hi, thanks for your comments, layer height is 0,1mm, I do not have a heated bed… (the K8400 comes without, but can be altered later on if I find the need for heated bed. So far no problem with prints loosening)
I’ll see if I can order a 12v PC cabinet fan from ebay, and install it. Thanks for the tip 
yes look’s good , more cooling as i did with my machine wil improve print’s.
cheers
Hi, Buddy,
Well very good, looks nice. Well, the K8400 has lots and lots of issues. I have this printer for a long long time and i have try all kind of settings and trust me there are difference between PLA materials melting temperatures. I have use all kind of distributors there are not two PLA materials the same as consistence ( density) to get a right speed on printing. I have try different types of temperature sensors and also there are difference between them. Also i have use different types of heads and heaters ( with one or two heaters). same problem … Till you not try to see the filament flowing truth nosel and seeing that gluing with the other part printed you will not have success. I have made all kind of cases and i so them tearing a part because it didn’t due due to the filament temperature.
Anyway, success !!! …