Great responses everyone, I’m in agreement with all of it so far. If anyone needs more local support and are in the east coast US, my shop is in Kentucky and can assist in getting started regardless of the FDM you choose. I know Tulsa isn’t exactly close wirlybird but we’re here if you need anything. There’s no price difference when buying from a reseller so if you want to support us, here’s my site: www.artlab3dprinting.com 12 You seem pretty familiar with the tech already wirlybird but local makerspaces are also great resources for getting started.
Skip to main content
This is a fantastic machine - Much more of a production fdm machine that is very reliable. Also - the company has phenomenal support. Furthermore, compare warranties.
Thanks for the input so far. Here are some observations/concerns/questions I have. P.S. I am also looking at the Flashforge Guider 2 and Ultimaker is out due to Bowden and 3mm filament.
My goal on a purchase is a larger format, enclosed printer that is not going to be a problem child, it is going to be working and needs to go from print to print without much or any fuss or fiddling!
I mainly print PLA, PETG and ABS but do need the high temp abilities on the extruder. The Guider 2 is looking like a solid machine of similar size but for a grand less than the N2.
Ok, question time!
The bed:
Bed leveling seems to be an issue when you get to larger prints. A common thread is that it is ok for “normal” prints in the middle but as you get to larger prints it is not so good and needs adjusting which appears to be a pain. This printer seems to be a perfect candidate for auto leveling similar to what the Prusa MK2 uses.
Also, I assume the buildtac can be replaced with a PEI sheet? I am not a fan of buildtac.
The extruders:
First word on the extruders seems to be “replace them”. Disappointing on a $3k machine! Maybe they are not so bad?
It also seems the gantry is heavy and not well supported with the single rod setup. Very likely contributing to ringing!
Fans:
It seems that the part cooling fan is also the extruder cooling fan and is on all the time. This is an issue for sure. I guess you can put a parts cooling fan on another port on the board and gain full, variable speed control - yes, no?! A controllable, variable speed parts fan is a big plus.
Have to use Ideamaker for some features such as load gcode over WIFI? I use S3D.
I read that the filament bay is tight and some have found their spools won’t fit.
Not trying to beat up this printer but I am ready to buy and have it down to 2-3 and need to make a choice.
I run six different printers and have built a couple so tinkering is not a big deal but I don’t want to have to tune it constantly!!
I read that if you buy through a re-seller then you must go to them for support and if parts are needed you go through the re-seller adding additional wait time. Maybe not a big deal but sometimes this can leave the user with little to no support.
Thanks again and I am sure more questions to come.
I am curious why so long? Aren’t they in California? Just wondering!
All made in China mate
They say they ship in 5 days after the order but they wait on banks to finish transfers first which can vary the transfer time + ground shipping to keep it affordable (was $250-$500+ back in the Kickstarter DHL days.)
You have already defined your criteria for selecting this printer which is similar to what encouraged me to select my N2
No real cause for regrets except I am not really convinced my double extruder is always helpful. For nstance: I used the power break facility yesterday night because I had to rush off somewhere. On resuming some seepage or oozing from the idle nozzle had pooled on to the print.
So on resuming, it began with a wild jolt That loosened the left extruder to the extent that it wobbled whilst printing thus marring the project.
Now that scenario is not peculiar to Raise 3d, it’s a great machine. I think with these modern printers with all their multi functions and variable settings the real issue is understanding the machine to get the best out of it.
That said, all my teething challenges revolved not around the machine or the Slicer but with the Touchpad Control system which, in the past could fail to pause, or switch off or respond to a command for temperature increase or x,y or z shift.
Otherwise, have fun. Had mine for 12 months and will buy the N2+
I am not convinced the extra grand for this printer is worth it when I compare to the Flashforge Guider 2 with a very similar build size (280 X 250 X 300). I do appreciate the input about it though.
I would be curious on the touchpad issue if you “ground” yourself by touching the frame before touching it, does it make a difference. If you have built up a bit of a “charge” it can interfere with using this type of pad.
You do you man, no worries on my part. I personally I’m not a huge fan of flashforge as their machines are so freakin’ loud. Had two different models in my shop for repairs and they were both noticeable louder than all my other machines beside an old Delta. Made it tough to talk to customers when they were running. As a print service, I’m a bit surprised you’re not trying to maximize your build volume. Big prints are where the money is at right now, atleast on a corporate business scale.
11 months later
This machine is for me a real disaster for a price of 3.5K €.
-
A student in industrial design would do a lot better. The technical choices are extremely bad
-
Hardware, electronics, USB extension Unitek (I do not know if this is allowed) is of a very poor quality
-
The leveling of the bed is unstable according to the temperature
-
Extruders are bad and too heavy. The XY axes flex under their weight and prevent a constant extruder / bed play adjustment over the entire surface of the
plateau (up to 0.1-0.2mm). Except improvement (resellers included) can not make a good adjustment of this printer. -
The cable-holder chain used anyhow also weighs on the extruders
I only had problems with this printer, and it can not even serve as an aquarium.
In fact, it is a prototype produced in series that Raise3D offers without shame. According to them, transportation is the cause of many worries, it is the only absurd excuse they have found.
In France, some of us will probably go to court to get a refund.