41

yep but would need more details

42

looks like you have your work cut out for you based on the responses, but if your looking for a “case”, remember that FDM will not be sealed as it is not solid and produces porous parts. The material chosen plays a big factor in this as well, but even vases made from these machines have difficutly retaining water at their raw state. Even finishing techniques fail for pressure testing cases. But then again its just a prototype, right? I am sure you will get a decent print and response time with any hub you choose… Good luck.

43

Hi, if you could be more specific in regards to the design such as any files you have or any blueprints you might have drawn up, we’ll see if we can work anything out for you. Let us know, thanks!

44

I could do that. Let us discuss this further

45

Please provide stl file on email 3dsales@snsprototyping.com - check out our profile on www.snsprototyping.co.in

46

I can handle 150+ no problem. E-mail me at 3dprinteddebris@gmail.com!

-Derek

47

How tall I can do it in pla Just designed a fan duct for a rc hover craft that is 180mm in diameter Send me a message we can talk more

48

Would not be that hard to give it good coat Of resin and seal it up or make it in fiber glass using a 3d printed plug/mold kinda sounds like a fun project

49

Hi Bennison93, can you share more details, as i think we can work this out (production wise)

BR,

Haim Menachem

Youi3d

50

*

51

I could handle it in 5 different technologies.

Just send me an e-mail with that part to :

info@Fabb-It.com

52

I wish I never posted anything on this post now, my inbox is full of notifications!!!

53

I can do that with SLA, SLS, FDM, SLM, CNC technologies, or even urethane casting for low volume production, with various materials at your choice. Premium quality and affordable price.

Contact me at service@ninjaprototype.com

Check out www.ninjaprototype.com

54

yep what material?

55

Hi there this sounds interesting. Please let me know more. I’ve got at least 8 different types of filament varying in strength which should be good for this.

do you have drawings or a sketch work from?

thanks paul

56

Hi Ben! You can upload your stl file to our hub to see it! It can fit in the printer, what material do you want to print?

57

Hello rbennison,

Yes we can handle 150mm dia cup effectively.

Let us know your requirement to serve you better.

You can choose different technologies to get your part from us.

Waiting to you hear from you soon.

Regards,

ENGINEERING TECHNIQUE,INDIA.

58

Where are tou based Bennison

59

Hi,

We would be happy to assist you in your printing needs. Would you like to set up an appointment to discuss further?

Thank you,

Amberlee

60

Please, contact me for details